Menü Schließen
50 lb Can of Lincoln Electric Stick Electrodes

Durchmesser / Lieferform

Durchmesser
 Can 22,7 kg
3,2 x 350 mm (1/8 x 14 in) ED030826
4,0 x 350 mm (5/32 x 14 in) ED030827
5,0 x 350 mm (3/16 x 14 in) ED030828

Pipeliner® 8P+

E-Hand-Schweißen (SMAW/MMA)

KLASSIFIZIERUNGEN::
E8010-G
E8010-P1

Low Alloy, Cellulosic, Pipe • AWS E8010-P1, also meets E8010-G

Durchmesser

Durchmesser wählen

  • 3,2 x 350 mm (1/8 x 14 in)
  • 4,0 x 350 mm (5/32 x 14 in)
  • 5,0 x 350 mm (3/16 x 14 in)

Lieferform

Lieferform auswählen

  • Can 22,7 kg

DETAILS

Designed for vertical down welding of cross-country and in-plant pipe

Eigenschaften

  • High productivity in vertical down and out-of-position pipe welding
  • Deep penetration
  • Clean, visible weld puddle
  • Meets NACE MR0175 for sour gas applications
  • Test data available for SSC (NACE TM0177) & HIC (NACE TM0284)

Typische Anwendungen

  • Root pass welding of up to X80 grade pipe
  • Hot, fill and cap pass of up to X70 grade pipe

Schweißpositionen

  • Alle

Schutzgas

  • Not Applicable

Besondere Eigenschaften

  • Q2 Lot® - Lot Controlled Chemistry and Mechanical Properties

Service Informationen

Dokumentation

Ergänzende Produkte

50 lb Can of Lincoln Electric Stick Electrodes

Pipeliner® 8P+

ED030827
50 lb Can of Lincoln Electric Stick Electrodes

Pipeliner® 8P+

ED030828
50 lb Can of Lincoln Electric Stick Electrodes

Pipeliner® 8P+

ED030826
K704-400-Amp Welding Accessory Kit

Zubehörsatz 400A

K704

BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS-Suchseite

CONFORMANCE

CONFORMANCES SPECIFICATION CLASSIFICATION
AWS AWS A5.5 E8010-G, E8010-P1
ABS AWS A5.5 E8010-P1
TUV AWS A5.5 E8010-P1
CWB CSA W48 E5510-P1

MECHANICAL PROPERTIES

Classification Yield Strength @ 0.2% Offset
MPa (ksi) 		Tensile Strength
MPa (ksi) 		Elongation
% 		Charpy V-Notch
J (ft-lbs) @ -30°C (-20°F) 		Charpy V-Notch
J (ft-lbs) @ -40°C (-40°F) 		Charpy V-Notch
J (ft-lbs) @ -45°C (-50°F) 		Hardness Rockwell B
E8010-P1 Requirement 460 (67) min. 550 (80) min. 19 min. 27 (20) min.
Typical Result, As-welded 460-560 (67-81) 560-680 (82-98) 19-30 51-114 (38-84) 56-88 (41-65) 33-96 (25-71) 88-92

DEPOSIT COMPOSITION

Classification %B %C %Cr %Mn %Mo %Ni %P %S %Si %V
E8010-P1 Requirement 0.20 max. 0.30 max. 1.20 max. 0.50 max. 1.00 max. 0.03 max. 0.03 max. 0.60 max. 0.10 max.
Typical Result 0.002 max. 0.11-0.20 0.01-0.05 0.55-0.91 0.09-0.21 0.60-1.00 0.01 max. 0.01 max. 0.09-0.36 0.02 max.

TYPICAL OPERATING PROCEDURES

Diameter Polarity Current
Amps
3.2 mm (1/8 in) DC+ 65-120
4.0 mm (5/32 in) DC+ 100-165
5.0 mm (3/16 in) DC+ 130-210