Menu Close
Innershield, Outershield, 10 lb. or 12.5 lb plastic spool

Diameters / Packaging

Diameters
 (4) 14 lb Coil
 10 lb Spool
 25 lb Spool
0.035 in (0.9 mm) ED016354
0.045 in (1.1 mm) ED016363 ED030638
0.068 in (1.7 mm) ED012506 ED030641
5/64 in (2.0 mm) ED012508 ED030645

Innershield® NR® -211-MP

Flux-Cored Self-Shielded (FCAW-S) | ED016363

CLASSIFICATIONS:
E71T-11
E71T11-AZ-CS3

Innershield® NR-211®-MP from Lincoln Electric is a versatile wire suitable for all-position welding of light gauge or thin plate.

Diameter

Select Diameter

  • 0.035 in (0.9 mm)
  • 0.045 in (1.1 mm)
  • 0.068 in (1.7 mm)
  • 5/64 in (2.0 mm)

Package

Select Package

  • 10 lb Spool
  • 25 lb Spool

DETAILS

A versatile wire suitable for all-position welding of light gauge or thin plate. Recommended for maximum plate thicknesses in the range of 7.9 mm (5/16 in) to 12.7 mm (1/2 in).

Features

  • Versatile welding capability on a variety of base materials
  • High operator appeal and good bead appearance
  • Easy slag removal
  • Fast freezing characteristics accommodate poor fit-up

Service Information

Documentation

You May Also Need

Innershield Flux Cored wire, 25 or 30 lb steel spool

Innershield® NR® -211-MP

ED030638
Innershield Flux Cored wire, 25 or 30 lb steel spool

Innershield® NR®-212 Flux-Cored (FCAW-S) Wire

ED030639
SuperArc MIG wire, 33 lb. Plastic spool

SuperArc® L-56® MIG (GMAW) Wire

ED032928
Image not found

Magnum® Contact Tip - Standard, .045 in (1.2 mm) - 10/pack

KP11-45
View All

BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page

CONFORMANCE

CONFORMANCES SPECIFICATION CLASSIFICATION
AWS AWS A5.20 E71T-11
ABS AWS A5.20 E71T-11
CWB CSA W48 E491T-11-AZ-CS3-H16 (E491T-11-H16)
DB ISO 17632-A T 42 Z Z NO 1 H10

MECHANICAL PROPERTIES

Classification Polarity Yield Strength @ 0.2% Offset
MPa (ksi) 		Tensile Strength
MPa (ksi) 		Elongation
%
E71T-11 Requirement DC- 400 (58) min. 480-660 (70-95) 20 min.
Typical Result, As-welded DC- 420 (61) 570-640 (82-92) 22

DEPOSIT COMPOSITION

Classification Polarity %Al %C %Mn %P %S %Si
E71T-11 Requirement DC- 0.30 max. 1.75 max. 0.03 max. 0.03 max. 0.60 max.
Typical Result DC- 1.2-1.6 0.15-0.28 0.53-0.79 0.012 0.004 0.13-0.28

TYPICAL OPERATING PROCEDURES

Diameter Polarity CTWD
mm (in.) 		Wire Feed Speed
m/min (in/min) 		Voltage
volts 		Approx. Current
amps 		Melt-off Rate
kg/hr (lb/hr) 		Deposition Rate
kg/hr (lb/hr) 		Efficiency
%
0.030 in (0.8 mm) DC- 13 (1/2) 1.3 (50) 13-14 30 0.2 (0.5) 0.2 (0.4) 81
0.030 in (0.8 mm) DC- 13 (1/2) 2.5 (100) 13-14 60 0.5 (1.1) 0.4 (0.8) 75
0.030 in (0.8 mm) DC- 13 (1/2) 3.8 (150) 14-15 80 0.7 (1.6) 0.6 (1.2) 78
0.030 in (0.8 mm) DC- 13 (1/2) 5.1 (200) 14-15 100 1.0 (2.1) 0.8 (1.7) 81
0.030 in (0.8 mm) DC- 13 (1/2) 6.4 (250) 15-16 130 1.2 (2.6) 1.0 (2.1) 80
0.030 in (0.8 mm) DC- 13 (1/2) 7.6 (300) 18-19 140 1.4 (3.2) 1.2 (2.6) 81
0.035 in (0.9 mm) DC- 13-16 (1/2-5/8) 1.3 (50) 14-15 30 0.4 (0.8) 0.3 (0.7) 81
0.035 in (0.9 mm) DC- 13-16 (1/2-5/8) 1.8 (70) 15-16 60 0.5 (1.2) 0.5 (1.0) 83
0.035 in (0.9 mm) DC- 13-16 (1/2-5/8) 2.8 (110) 16-17 115 0.7 (1.6) 0.6 (1.3) 78
0.035 in (0.9 mm) DC- 13-16 (1/2-5/8) 3.8 (150) 17-18 130 1.0 (2.2) 0.8 (1.7) 78
0.035 in (0.9 mm) DC- 13-16 (1/2-5/8) 5.1 (200) 18-19 155 1.4 (3.0) 1.1 (2.5) 84
0.035 in (0.9 mm) DC- 13-16 (1/2-5/8) 7.0 (275) 20-21 155 2.0 (4.4) 1.5 (3.4) 78
.045" (1.1 mm) DC- 13 (1/2) 1.8 (70) 15-16 120 0.7 (1.6) 0.5 (1.1) 69
.045" (1.1 mm) DC- 13 (1/2) 2.3 (90) 16-17 140 1.0 (2.2) 0.8 (1.7) 77
.045" (1.1 mm) DC- 13 (1/2) 2.8 (110) 17-18 160 1.2 (2.7) 1.0 (2.3) 85
.045" (1.1 mm) DC- 13 (1/2) 3.3 (130) 18-19 170 1.5 (3.2) 1.2 (2.7) 84
0.068 in (1.7 mm) DC- 19-32 (3/4-1 1/4) 1.0 (40) 15-16 125 1.0 (2.1) 0.8 (1.7) 81
0.068 in (1.7 mm) DC- 19-32 (3/4-1 1/4) 1.9 (75) 18-19 190 1.8 (4.0) 1.5 (3.4) 85
0.068 in (1.7 mm) DC- 19-32 (3/4-1 1/4) 3.3 (130) 20-21 270 3.2 (7.0) 2.8 (6.1) 88
0.068 in (1.7 mm) DC- 19-32 (3/4-1 1/4) 4.4 (175) 23-24 300 4.3 (9.4) 3.8 (8.4) 89
5/64 in (2.0 mm) DC- 19-32 (3/4-1 1/4) 1.3 (50) 16-17 180 1.6 (3.5) 1.3 (2.9) 83
5/64 in (2.0 mm) DC- 19-32 (3/4-1 1/4) 1.9 (75) 18-19 235 2.4 (5.3) 2.0 (4.5) 85
5/64 in (2.0 mm) DC- 19-32 (3/4-1 1/4) 3.0 (120) 20-21 290 3.8 (8.4) 3.4 (7.4) 88
5/64 in (2.0 mm) DC- 19-32 (3/4-1 1/4) 4.1 (160) 22-23 325 5.1 (11.2) 4.5 (10.0) 89
3/32 in (2.4 mm) DC- 19-32 (3/4-1 1/4) 1.3 (50) 16-17 245 2.3 (5.0) 1.9 (4.2) 84
3/32 in (2.4 mm) DC- 19-32 (3/4-1 1/4) 1.9 (75) 19-20 305 3.4 (7.5) 2.9 (6.4) 85
3/32 in (2.4 mm) DC- 19-32 (3/4-1 1/4) 2.5 (100) 20-21 365 4.5 (10.0) 3.9 (8.7) 87
3/32 in (2.4 mm) DC- 19-32 (3/4-1 1/4) 3.3 (130) 22-23 400 5.9 (12.9) 5.1 (11.3) 88