Menu Close
SuperGlide MIG wire, Steel Spool

Diameters / Packaging

Diameters
 (4) 15 lb Plastic Spool
 33 lb Spool
0.045 in (1.1 mm) ED029418 ED029201
0.052 in (1.3 mm) ED029204

Outershield® 71 Elite Flux-cored (FCAW-G) Wire

Flux-Cored Gas-Shielded (FCAW-G) | ED029201

CLASSIFICATIONS:
E71T-9C-H8
E71T-9M-H8
E71T1-C1A2-CS1-H8
E71T1-M21A2-CS1-H8

Outershield® 71 Elite from Lincoln Electric has a smooth arc transfer, low spatter and good bead appearance.

Diameter

Select Diameter

  • 0.045 in (1.1 mm)
  • 0.052 in (1.3 mm)

Package

Select Package

  • (4) 15 lb Plastic Spool
  • 33 lb Spool

DETAILS

Smooth arc transfer, low spatter and good bead appearance make this a top quality electrode. Operators will enjoy the well directed arc with small ball transfer.

Features

  • Smooth arc transfer and low spatter
  • Designed for welding with either 100% CO2 or 75-82% Argon/balance CO2 shielding gases
  • Good bead appearance
  • Fast freezing slag for out-of-position welding
  • Meets AWS D1.8 seismic lot waiver requirements
  • Notes: AWS D1.8 structural steel seismic supplement test data can be found at the Lincoln Electric Certificate Center.

Service Information

You May Also Need

Magnum 400 MIG Gun

Magnum® 400 Welding Guns

K471-21
Outershield Wire, 25 LB Plastic Spool

Outershield® 71M Flux-cored (FCAW-G) Wire

ED022659
Accu-Trak Drum

Outershield® 71M Flux-cored (FCAW-G) Wire

ED027364
UltraCore, 33 LB fiber spool

UltraCore® 71A75 Dual Flux-cored (FCAW-G) Wire

ED031669
View All

BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page

CONFORMANCE

CONFORMANCES SPECIFICATION CLASSIFICATION
AWS AWS A5.20 E71T-1C-H8, E71T-1M-H8, E71T-9C-H8, E71T-9M-H8
AWS AWS A5.36 E71T1-C1A2-CS1-H8, E71T1-M21A2-CS1-H8
ABS ABS - Part 2 3YSA H10
CWB CSA W48 E491T1-C1A3-CS1-H8 (E491T-9-H8), E491T1-GA3-CS1-H8 (E491T-9M-H8), E491T1-M20A3-CS1-H8 (E491T-9M-H8), E491T1-M21A3-CS1-H8 (E491T-9M-H8)
DNV-GL DNV - 2.9 III YMS H10
LR LR - Chapter 11 3YS H10

MECHANICAL PROPERTIES

Classification Shielding Gas Polarity Yield Strength @ 0.2% Offset
MPa (ksi) 		Tensile Strength
MPa (ksi) 		Elongation
% 		Charpy V-Notch
J (ft-lbs) @ -30°C (-20°F)
E71T-9C-H8 Requirement 100% CO2 DC+ 400 (58) min. 480-660 (70-95) 22 min. 27 (20) min.
E71T-9M-H8 Requirement 75-80% Ar, balance CO2 DC+ 400 (58) min. 480-660 (70-95) 22 min. 27 (20) min.
E71T1-C1A2-CS1-H8 Requirement 100% CO2 DC+ 400 (58) min. 480-660 (70-95) 22 min. 27 (20) min.
E71T1-M21A2-CS1-H8 Requirement M21-ArC DC+ 400 (58) min. 480-660 (70-95) 22 min. 27 (20) min.
Typical Result, As-welded 100% CO2 DC+ 560 (81) 610 (89) 30 38-46 (28-34)
Typical Result, As-welded 75% Ar, 25% CO2 DC+ 590 (86) 650 (95) 25 89-95 (66-70)

DEPOSIT COMPOSITION

Classification Shielding Gas Polarity %B %C %Mn %P %S %Si Diffusible Hydrogen
mL/100g Weld Metal
E71T-9C-H8 Requirement 100% CO2 DC+ 0.12 max. 1.75 max. 0.03 max. 0.03 max. 0.90 max. 8.0 max.
E71T-9M-H8 Requirement 75-80% Ar, balance CO2 DC+ 0.12 max. 1.75 max. 0.03 max. 0.03 max. 0.90 max. 8.0 max.
E71T1-C1A2-CS1-H8 Requirement 100% CO2 DC+ 0.12 max. 1.75 max. 0.030 max. 0.030 max. 0.90 max. 8 max.
E71T1-M21A2-CS1-H8 Requirement M21-ArC DC+ 0.12 max. 1.75 max. 0.030 max. 0.030 max. 0.90 max. 8 max.
Typical Result 100% CO2 DC+ 0.0050 0.06 1.21 0.01 0.011 0.41 4.2
Typical Result 75% Ar, 25% CO2 DC+ 0.0060 0.06 1.45 0.01 0.01 0.59 5.7

TYPICAL OPERATING PROCEDURES

Diameter Shielding Gas Polarity CTWD
mm (in.) 		Wire Feed Speed
m/min (in/min) 		Voltage
volts 		Approx. Current
amps 		Melt-off Rate
kg/hr (lb/hr) 		Deposition Rate
kg/hr (lb/hr) 		Efficiency
%
0.045 in (1.1 mm) 75% Ar / 25% CO2 DC+ 19 (3/4) 4.5 (175) 21-24 130 1.7 (3.8) 1.5 (3.3) 87
0.045 in (1.1 mm) 75% Ar / 25% CO2 DC+ 19 (3/4) 6.4 (250) 23-26 155 2.4 (5.4) 2.1 (4.7) 87
0.045 in (1.1 mm) 75% Ar / 25% CO2 DC+ 19 (3/4) 7.6 (300) 24-27 180 2.9 (6.4) 2.5 (5.6) 87
0.045 in (1.1 mm) 75% Ar / 25% CO2 DC+ 19 (3/4) 8.9 (350) 25-28 205 3.4 (7.6) 3.0 (6.6) 87
0.045 in (1.1 mm) 75% Ar / 25% CO2 DC+ 19 (3/4) 10.2 (400) 26-29 230 4.0 (8.7) 3.5 (7.6) 87
0.045 in (1.1 mm) 75% Ar / 25% CO2 DC+ 19 (3/4) 12.8 (500) 27-30 260 5.0 (10.9) 4.3 (9.5) 87
0.045 in (1.1 mm) 75% Ar / 25% CO2 DC+ 19 (3/4) 15.3 (600) 28-31 290 6.0 (13.1) 5.2 (11.4) 87
0.052 in (1.3 mm) 75% Ar / 25% CO2 DC+ 19 (3/4) 3.8 (150) 21-24 150 2.1 (4.6) 1.8 (3.9) 86
0.052 in (1.3 mm) 75% Ar / 25% CO2 DC+ 19 (3/4) 5.1 (200) 22-25 180 2.8 (6.1) 2.4 (5.2) 86
0.052 in (1.3 mm) 75% Ar / 25% CO2 DC+ 19 (3/4) 6.4 (250) 23-26 210 3.4 (7.6) 3.0 (6.5) 86
0.052 in (1.3 mm) 75% Ar / 25% CO2 DC+ 19 (3/4) 7.6 (300) 24-27 240 4.8 (10.6) 4.1 (7.8) 86
0.052 in (1.3 mm) 75% Ar / 25% CO2 DC+ 19 (3/4) 10.2 (400) 26-28 315 6.2 (13.7) 5.4 (10.5) 86
0.052 in (1.3 mm) 75% Ar / 25% CO2 DC+ 19 (3/4) 12.8 (500) 28-31 335 6.9 (15.2) 6.0 (13.1) 86
1/16 in (1.6 mm) 75% Ar / 25% CO2 DC+ 19 (3/4) 3.2 (125) 21-24 190 2.4 (5.2) 2.0 (4.4) 85
1/16 in (1.6 mm) 75% Ar / 25% CO2 DC+ 19 (3/4) 3.8 (150) 22-25 205 2.8 (6.2) 2.4 (5.3) 85
1/16 in (1.6 mm) 75% Ar / 25% CO2 DC+ 19 (3/4) 5.1 (200) 22-26 240 3.8 (8.3) 3.2 (7.0) 85
1/16 in (1.6 mm) 75% Ar / 25% CO2 DC+ 19 (3/4) 6.4 (250) 23-27 290 4.7 (10.3) 4.0 (8.8) 85
1/16 in (1.6 mm) 75% Ar / 25% CO2 DC+ 19 (3/4) 7.6 (300) 24-28 325 5.6 (12.4) 4.8 (10.5) 85
1/16 in (1.6 mm) 75% Ar / 25% CO2 DC+ 19 (3/4) 10.2 (400) 27-31 400 7.5 (16.5) 6.4 (14.0) 85