DETAILS
Used for welding similar alloys (containing approximately 2% molybdenum). Also used for high temperature service applications. The maximum carbon content is maintained at or below 0.03% to increase resistance to intergranular corrosion. Can be used for welding molybdenum-bearing austenitic alloys containing 0.03% maximum carbon.
Features
- The 2-3% molybdenum improves pitting corrosion resistance of the weld deposit
- Molybdenum grade increases corrosion resistance
- Use for high temperature service applications
- 0.03% carbon content increases resistance to intergranular corrosion
- Ink jet printing identification on entire length of electrode
Typical Applications
- Sheet metal on the corresponding stainless steel base metals
- High pressure piping and tubing
- Use for welding similar alloys containing approximately 2% molybdenum
Welding Positions
- All
Shielding Gas
- 100% Argon
Disclaimers
Service Information
Documentation
You May Also Need
BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page
See test result disclaimer
CONFORMANCE
CONFORMANCES | SPECIFICATION | CLASSIFICATION |
---|---|---|
AWS | AWS A5.9 | ER316, ER316L |
ABS | AWS A5.9 | ER316, ER316L |
CWB | CSA W48 | ER316, ER316L |
MIL | MIL-E-19933E AMD1 | MIL-316L |
WIRE COMPOSITION
Classification | %C | %Cr | %Cu | %Mn | %Mo | %N | %Nb | %Ni | %P | %S | %Si | %Ti | Ferrite Number (Delong ©) | Ferrite Number (WRC-1992 ©) |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
ER316 Requirement | 0.08 max. | 18.0 - 20.0 | 0.75 max. | 1.0 - 2.5 | 2.0 - 3.0 | Info. Only | Info. Only | 11.0 - 14.0 | 0.03 max. | 0.03 max. | 0.30 - 0.65 | Info. Only | Info. Only | |
ER316L Requirement | 0.03 max. | 18.0 - 20.0 | 0.75 max. | 1.0 - 2.5 | 2.0 - 3.0 | Info. Only | Info. Only | 11.0 - 14.0 | 0.03 max. | 0.03 max. | 0.30 - 0.65 | Info. Only | Info. Only | |
Typical Result | 0.01-0.02 | 18.2-18.8 | 0.03-0.22 | 1.7-2.0 | 2.2-2.6 | 0.03-0.04 | 0.01-0.06 | 11.6-12.4 | 0.01-0.02 | 0.02 max. | 0.33-0.54 | 0.00 max. | 7-12 | 7-11 |