DETALLES
Designed for vertical down welding of cross-country and in-plant pipe
Características
- Q2 Lot® - Lot Controlled Chemistry and Mechanical Properties
- Standard in the pipe welding industry for root pass
- High operator appeal and control
- Easy slag removal
- Meets NACE MR0175 for sour gas applications
- Test data available for SSC (NACE TM0177) & HIC (NACE TM0284)
Información de mantenimiento
Documentación
También puede necesitar
BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. Página de búsqueda de HDS
CONFORMANCE
| CONFORMANCES | SPECIFICATION | CLASSIFICATION |
|---|---|---|
| AWS | AWS A5.1 | E6010 |
| ISO | ISO 2560-A | E 42 3 C 2 1 |
| ABS | AWS A5.1 | E6010 |
| CWB | CSA W48 | E4310 |
| DNV-GL | DNV - 2.9 | 3 |
MECHANICAL PROPERTIES
| Classification |
Yield Strength @ 0.2% Offset
MPa (ksi) |
Tensile Strength
MPa (ksi) |
Elongation
% |
Charpy V-Notch
J (ft-lbs) @ -30°C (-20°F) |
Hardness Rockwell B |
|---|---|---|---|---|---|
| E6010 Requirement | 330 (48) min. | 410 (60) min. | 22 min. | 27 (20) min. | |
| Typical Result, As-welded | 400-560 (59-81) | 490-670 (72-98) | 22-33 | 29-113 (21-83) | 84-86 |
DEPOSIT COMPOSITION
| Classification | %C | %Cr | %Mn | %Mo | %Ni | %P | %S | %Si | %V |
|---|---|---|---|---|---|---|---|---|---|
| E6010 Requirement | 0.20 max. | 0.20 max. | 1.20 max. | 0.30 max. | 0.30 max. | 1.00 max. | 0.08 max. | ||
| Typical Result | 0.10-0.20 | 0.01-0.04 | 0.43-0.73 | 0.03 max. | 0.07 max. | 0.003-0.012 | 0.003-0.014 | 0.12-0.30 | 0.01 max. |
TYPICAL OPERATING PROCEDURES
| Diameter | Polarity⁽¹⁾ |
Current
Amps |
|---|---|---|
| 2.5 mm (3/32 in) | DC+ | 50-85 |
| 2.5 mm (3/32 in) | DC- | 50-85 |
| 3.2 mm (1/8 in) | DC+ | 75-135 |
| 3.2 mm (1/8 in) | DC- | 75-135 |
| 4.0 mm (5/32 in) | DC+ | 100-175 |
| 4.0 mm (5/32 in) | DC- | 100-175 |
NOTES
| Note |
|---|
| ⁽¹⁾ Preferred polarity is listed first. |