DETALLES
SuperGlaze 5356 es una aleación de aluminio y magnesio muy utilizada para la soldadura de mayor resistencia de los materiales base 5XXX y 6XXX. Tiene una mayor resistencia columnar y utiliza menos amperaje para la misma WFS que los metales de aportación 4XXX.
Características
- Calidad 5356 premium en bobina
- Óptimo para aplicaciones semi-automáticas
- Arco estable y baño de soldadura fácil de controlar
Información de mantenimiento
BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. Página de búsqueda de HDS
CONFORMANCE
| CONFORMANCES | SPECIFICATION | CLASSIFICATION |
|---|---|---|
| AWS | AWS A5.10 | ER5356 |
MECHANICAL PROPERTIES
| Classification | Shielding Gas | Polarity |
Tensile Strength
MPa (ksi) |
|---|---|---|---|
| ER5356 Requirement | Not Specified | Not Specified | 240 (35) min. |
| Typical Result, As-welded | 100% Ar | DC+ | 250-290 (36-42) |
WIRE COMPOSITION
| Classification | %Al | %Be | %Cr | %Fe | %Mg | %Mn | %Si | %Ti | %Total Cu | %Zn |
|---|---|---|---|---|---|---|---|---|---|---|
| ER5356 Requirement | Remainder | 0.0003 max. | 0.05 - 0.20 | 0.40 max. | 4.5 - 5.5 | 0.05 - 0.20 | 0.25 max. | 0.06 - 0.20 | 0.10 max. | 0.10 max. |
| Typical Result | Remainder | 0.0002 | 0.12 | 0.09 | 4.9 | 0.12 | 0.06 | 0.09 | 0.00 | 0.00 |
TYPICAL OPERATING PROCEDURES
| Diameter | Shielding Gas |
Gas Flow
L/min (CFH) |
Polarity |
CTWD
mm (in.) |
Wire Feed Speed
m/min (in/min) |
Voltage
volts |
Approx. Current
amps |
|---|---|---|---|---|---|---|---|
| Typical Result | 100% Ar | 25 (53) | DC+ | 16 (⁵/₈) | 18 (709) | 23.3 | 180 |
| Typical Result | 100% Ar | 25 (53) | DC+ | 16 (⁵/₈) | 13 (512) | 24.3 | 210 |
| Typical Result | 100% Ar | 25 (53) | DC+ | 19 (³/₄) | 9 (354) | 25.1 | 280 |