Menu Cerrar
Accu-Trak Drum

Diámetros / Embalaje

Diámetros
mm 		25 lb (11.3 kg) Plastic Spool
 33 lb (15 kg) Plastic Spool
 500 lb (227 kg) Accu-Trak® Drum
0.035 in (0.9 mm) ED037250 ED029768
0.045 in (1.1 mm) ED037251 ED029769
1/16 in (1.6 mm) ED019294

Blue Max® MIG 308LSi

Soldadura de Arco Metálico con Gas (GMAW) | ED029769

CLASIFICACIONES:
ER308Si
ER308LSi

Blue Max MIG 308LSi brinda un alto nivel de silicio para mayor fluidez del charco y mojado de la punta, lubricante patentado de superficie para una alimentación estable y estabilidad del arco, versátil electrodo diseñado para soldar aceros inoxidables CrN

Diámetro

Seleccionar diámetro

  • 0.035 in (0.9 mm)
  • 0.045 in (1.1 mm)
  • 1/16 in (1.6 mm)

Paquete

Desencadenar

  • 33 lb (15 kg) Plastic Spool
  • 500 lb (227 kg) Accu-Trak® Drum

Detalles

BLUE MAX® MIG 308LSi has a higher silicon level than a standard 308L which gives increased puddle fluidity and toe wetting allowing for potentially high travel speeds

Características

  • Q2 Lot® - Certified Material Test Report showing actual wire composition, Country of Origin and calculated ferrite number (FN) of each lot is available online in the Certificate Center
  • Proprietary surface lubricant for steady feeding and arc stability leading to exceptional performance at high wire feed speeds
  • High silicon level for increased puddle fluidity and toe wetting
  • Versatile electrode designed to weld CrNi austenitic stainless steels
  • Used to primarily weld equipment made with 304 type stainless steel
  • Higher silicon content improves wetting of the weld metal and potentially higher travel speeds compared to standard 308L products

Servicio de información

También puede necesitar

Accu-Trak Drum

Blue Max ® MIG 309LSi

ED029771
Accu-Trak Drum

Blue Max® MIG 316LSi

ED029773
SHADOW SPLIT LEATHER-SLEEVED JACKET

Chamarra para Soldador con Mangas de Carnaza Negra - K2986-L

K2986-L

ANTES DE USARLO, LEA Y COMPRENDA LA HOJA DE DATOS DE SEGURIDAD (SDS) DE ESTE PRODUCTO Y LA INFORMACIÓN ESPECÍFICA IMPRESA EN EL ENVASE DEL PRODUCTO. Página de Búsqueda SDS

Ver los resultados de la prueba de limitación de responsabilidad

CONFORMANCE

CONFORMANCES SPECIFICATION CLASSIFICATION
AWS AWS A5.9 ER308LSi, ER308Si
ABS AWS A5.9 ER308LSi, ER308Si

MECHANICAL PROPERTIES

Classification Shielding Gas Yield Strength @ 0.2% Offset
MPa (ksi) 		Tensile Strength
MPa (ksi) 		Elongation
% 		Charpy V-Notch
J (ft-lbs) @ -60°C (-76°F)
Typical Result 98% Ar, 2% O2 430 (63) 620 (90) 35 75 (55)

WIRE COMPOSITION

Classification %C %Cr %Cu %Mn %Mo %N %Nb %Ni %P %S %Si %Ti Ferrite Number (Delong ©) Ferrite Number (WRC-1992 ©)
ER308LSi Requirement 0.03 max. 19.5 - 22.0 0.75 max. 1.0 - 2.5 0.75 max. 9.0 - 11.0 0.03 max. 0.03 max. 0.65 - 1.00
ER308Si Requirement 0.08 max. 19.5 - 22.0 0.75 max. 1.0 - 2.5 0.75 max. 9.0 - 11.0 0.03 max. 0.03 max. 0.65 - 1.00
Typical Result 0.02 19.9-20.1 0.10 1.7-2.0 0.08 0.06 0.03 max. 9.6-10.7 0.03 0.01 0.75-0.93 0.01 12 11

TYPICAL OPERATING PROCEDURES

Diameter Transfer Mode Shielding Gas Polarity CTWD
mm (in.)⁽¹⁾ 		Wire Feed Speed
m/min (in/min) 		Voltage
volts 		Approx. Current
amps 		Deposition Rate
kg/hr (lb/hr)
0.035 in (0.9 mm) Short Circuit Transfer 90% He / 7.5% Ar / 2.5% CO2 DC+ 13 (1/2) 3.0 (120) 19-20 55 0.9 (2.0)
0.035 in (0.9 mm) Short Circuit Transfer 90% He / 7.5% Ar / 2.5% CO2 DC+ 13 (1/2) 4.6 (180) 19-20 85 1.4 (3.0)
0.035 in (0.9 mm) Short Circuit Transfer 90% He / 7.5% Ar / 2.5% CO2 DC+ 13 (1/2) 5.8 (230) 20-21 105 1.8 (3.9)
0.035 in (0.9 mm) Short Circuit Transfer 90% He / 7.5% Ar / 2.5% CO2 DC+ 13 (1/2) 7.6 (300) 20-21 125 2.3 (5.0)
0.035 in (0.9 mm) Short Circuit Transfer 90% He / 7.5% Ar / 2.5% CO2 DC+ 13 (1/2) 8.9 (350) 21-22 140 2.7 (5.9)
0.035 in (0.9 mm) Short Circuit Transfer 90% He / 7.5% Ar / 2.5% CO2 DC+ 13 (1/2) 10.2 (400) 22-23 160 3.1 (6.7)
0.045 in (1.1 mm) Short Circuit Transfer 90% He / 7.5% Ar / 2.5% CO2 DC+ 13 (1/2) 2.5 (100) 19-20 100 1.1 (2.8)
0.045 in (1.1 mm) Short Circuit Transfer 90% He / 7.5% Ar / 2.5% CO2 DC+ 13 (1/2) 3.2 (125) 19-20 120 1.5 (3.5)
0.045 in (1.1 mm) Short Circuit Transfer 90% He / 7.5% Ar / 2.5% CO2 DC+ 13 (1/2) 3.8 (150) 21 135 1.7 (4.2)
0.045 in (1.1 mm) Short Circuit Transfer 90% He / 7.5% Ar / 2.5% CO2 DC+ 13 (1/2) 4.4 (175) 21 140 2.0 (4.8)
0.045 in (1.1 mm) Short Circuit Transfer 90% He / 7.5% Ar / 2.5% CO2 DC+ 13 (1/2) 5.6 (220) 22 170 2.6 (6.1)
0.045 in (1.1 mm) Short Circuit Transfer 90% He / 7.5% Ar / 2.5% CO2 DC+ 13 (1/2) 6.4 (250) 22-23 175 2.9 (6.9)
0.045 in (1.1 mm) Short Circuit Transfer 90% He / 7.5% Ar / 2.5% CO2 DC+ 13 (1/2) 7.0 (275) 22-23 185 3.2 (7.6)
0.035 in (0.9 mm) Axial Spray Transfer 98% Ar / 2% O2 DC+ 13 (1/2) 10.2 (400) 22 180 3.1 (6.7)
0.035 in (0.9 mm) Axial Spray Transfer 98% Ar / 2% O2 DC+ 13 (1/2) 10.8 (425) 23 190 3.3 (7.1)
0.035 in (0.9 mm) Axial Spray Transfer 98% Ar / 2% O2 DC+ 13 (1/2) 11.4 (450) 23 200 3.5 (7.5)
0.035 in (0.9 mm) Axial Spray Transfer 98% Ar / 2% O2 DC+ 13 (1/2) 12.1 (475) 23 210 3.7 (8.0)
0.045 in (1.1 mm) Axial Spray Transfer 98% Ar / 2% O2 DC+ 13 (1/2) 6.1 (240) 23 195 2.8 (6.6)
0.045 in (1.1 mm) Axial Spray Transfer 98% Ar / 2% O2 DC+ 13 (1/2) 6.6 (260) 24 230 3.0 (7.2)
0.045 in (1.1 mm) Axial Spray Transfer 98% Ar / 2% O2 DC+ 13 (1/2) 7.6 (300) 24 240 3.5 (8.3)
0.045 in (1.1 mm) Axial Spray Transfer 98% Ar / 2% O2 DC+ 13 (1/2) 8.3 (325) 25 250 3.8 (9.0)
0.045 in (1.1 mm) Axial Spray Transfer 98% Ar / 2% O2 DC+ 13 (1/2) 9.1 (360) 25 260 4.2 (10.0)
1/16 in (1.6 mm) Axial Spray Transfer 98% Ar / 2% O2 DC+ 19 (3/4) 4.4 (175) 25 260 4.3 (9.2)
1/16 in (1.6 mm) Axial Spray Transfer 98% Ar / 2% O2 DC+ 19 (3/4) 5.1 (200) 26 310 4.9 (10.5)
1/16 in (1.6 mm) Axial Spray Transfer 98% Ar / 2% O2 DC+ 19 (3/4) 6.4 (250) 26 330 6.2 (13.1)
1/16 in (1.6 mm) Axial Spray Transfer 98% Ar / 2% O2 DC+ 19 (3/4) 7.0 (275) 27 360 6.8 (14.4)
1/16 in (1.6 mm) Axial Spray Transfer 98% Ar / 2% O2 DC+ 19 (3/4) 7.6 (300) 28 390 7.4 (15.8)

NOTES

Note
⁽¹⁾ To estimate ESO, subtract 1/8 in (3.2 mm) from CTWD.