Detalles
EXCALIBUR® 410-16 is great for overlay on carbon and low alloy steels, should be used with preheat and interpass temperatures greater than 400°F (200°C).
Características
- Preheat and interpass temperatures greater than 400°F (200°C) are recommended during welding
- Great for overlay on carbon and low alloy steels
- Welding 410 and 410s Stainless Steels
Servicio de información
ANTES DE USARLO, LEA Y COMPRENDA LA HOJA DE DATOS DE SEGURIDAD (SDS) DE ESTE PRODUCTO Y LA INFORMACIÓN ESPECÍFICA IMPRESA EN EL ENVASE DEL PRODUCTO. Página de Búsqueda SDS
Ver los resultados de la prueba de limitación de responsabilidad
CONFORMANCE
| CONFORMANCES | SPECIFICATION | CLASSIFICATION |
|---|---|---|
| AWS | AWS A5.4 | E410-16 |
MECHANICAL PROPERTIES
| Classification |
Tensile Strength
MPa (ksi) |
Elongation
% |
|---|---|---|
| E410-16 Requirement | 520 (75) min. | 20 min. |
| Typical Result, 1 hour @ 745°C (1375°F) | 680-700 (99-101) | 21-22 |
DEPOSIT COMPOSITION
| Classification | %C | %Cr | %Cu | %Mn | %Mo | %Ni | %P | %S | %Si |
|---|---|---|---|---|---|---|---|---|---|
| E410-16 Requirement | 0.12 max. | 11.0 - 13.5 | 0.75 max. | 1.0 max. | 0.75 max. | 0.7 max. | 0.04 max. | 0.03 max. | 0.90 max. |
| Typical Result | 0.09-0.10 | 12.8-13.1 | 0.11-0.14 | 0.7-0.9 | 0.03 | 0.2-0.3 | 0.04 | 0.01 | 0.36-0.39 |
TYPICAL OPERATING PROCEDURES
| Diameter | Polarity⁽¹⁾ |
Current
Amps |
|---|---|---|
| 3/32 in (2.4 mm) | DC+ | 40-80 |
| 3/32 in (2.4 mm) | AC | 40-80 |
| 1/8 in (3.2 mm) | DC+ | 75-110 |
| 1/8 in (3.2 mm) | AC | 75-110 |
| 5/32 in (4.0 mm) | DC+ | 95-150 |
| 5/32 in (4.0 mm) | AC | 95-150 |
| 3/16 in (4.8 mm) | DC+ | 130-200 |
| 3/16 in (4.8 mm) | AC | 130-200 |
NOTES
| Note |
|---|
| ⁽¹⁾ Preferred polarity is listed first. |