Innershield/Outershield/Submerged Arc Wire

Diámetros / Embalaje

Diámetros
mm
25 lb Spool
50 lb Coil
3/32 in (2.4 mm) ED012593,ED030005
5/64 in (2.0 mm) ED034185

Innershield® NR® -305

Soldadura Tubular Autoprotegida con Núcleo de Fundente (FCAW-S) | ED012593

CLASIFICACIONES:
E70T-6-H16
E70T6-A2-CS3-H16

Innershield NR -305 Capaz de producir depósitos de soldadura con propiedades de impacto que exceden 27 J (20 ft•lbf) a -29 °C (-20 °F).

Detalles

Designed for in-position, high deposition welding on carbon steel. Recommended in single or multiple pass, automatic and semiautomatic welding.

Características

  • High deposition rates in the flat and horizontal positions
  • Smooth arc and low spatter levels
  • Capable of producing weld deposits with impact properties exceeding 27 J (20 ft·lbf) at -29°C (-20°F)
  • Welds on lightly rusted or primed plate
  • Notes: AWS D1.8 structural steel seismic supplement test data can be found in the Lincoln Electric Certificate Center

También puede necesitar

ANTES DE USARLO, LEA Y COMPRENDA LA HOJA DE DATOS DE SEGURIDAD (SDS) DE ESTE PRODUCTO Y LA INFORMACIÓN ESPECÍFICA IMPRESA EN EL ENVASE DEL PRODUCTO. Página de Búsqueda SDS

Ver los resultados de la prueba de limitación de responsabilidad

CONFORMANCE

CONFORMANCES SPECIFICATION CLASSIFICATION
AWS AWS A5.20 E70T-6-H8
AWS AWS A5.36 E70T6-A2-CS3-H8
ABS ABS - Part 2 2YSA
ABS AWS A5.20 E70T-6-H16
DNV-GL DNV - 2.9 II YMS
DB ISO 17632-A T 42 0 W N 3 H15

MECHANICAL PROPERTIES

Classification Polarity Yield Strength @ 0.2% Offset
MPa (ksi)
Tensile Strength
MPa (ksi)
Elongation
%
Charpy V-Notch
J (ft-lbs) @ -30°C (-20°F)
E70T-6-H8 Requirement DC+ 400 (58) min. 480-660 (70-95) 22 min. 27 (20) min.
E70T6-A2-CS3-H8 Requirement DC+ 400 (58) min. 480-660 (70-95) 22 min. 27 (20) min.
Typical Result, As-welded DC+ 410 (60) 530-590 (76-86) 23 35-64 (26-47)

DEPOSIT COMPOSITION

Classification Polarity %Al %B %C %Mn %P %S %Si Diffusible Hydrogen
mL/100g Weld Metal
E70T-6-H8 Requirement DC+ 0.30 max. 1.75 max. 0.03 max. 0.03 max. 0.60 max. 8.0 max.
E70T6-A2-CS3-H8 Requirement DC+ 0.30 max. 1.75 max. 0.030 max. 0.030 max. 0.60 max. 8 max.
Typical Result DC+ 0.7-1.0 0.0019 0.05-0.08 1.19-1.61 0.020 0.010 0.17-0.28 5.1

TYPICAL OPERATING PROCEDURES

Diameter Polarity CTWD
mm (in.)
Wire Feed Speed
m/min (in/min)
Voltage
volts
Approx. Current
amps
Melt-off Rate
kg/hr (lb/hr)
Deposition Rate
kg/hr (lb/hr)
Efficiency
%
5/64 in (2.0 mm) DC+ 35-51 (1 3/8-2) 4.4 (175) 20-22 300 8.5 (10.5) 4.0 (8.8) 84
5/64 in (2.0 mm) DC+ 35-51 (1 3/8-2) 5.6 (220) 21-23 330 6 .0 (13.3) 5.0 (11.1) 83
5/64 in (2.0 mm) DC+ 35-51 (1 3/8-2) 6.6 (260) 22-24 360 7.1 (15.7) 5.9 (13.1) 83
5/64 in (2.0 mm) DC+ 35-51 (1 3/8-2) 7.6 (300) 24-26 375 8.2 (18.1) 6.9 (15.2) 84
5/64 in (2.0 mm) DC+ 35-51 (1 3/8-2) 8.3 (325) 25-27 400 8.9 (19.7) 7.4 (16.4) 83
3/32 in (2.4 mm) DC+ 41-54 (1 5/8-2 1/4)⁽⁴⁾ 4.1 (160) 21-23 330 6.0 (13.3) 5.0 (11.0) 82
3/32 in (2.4 mm) DC+ 41-54 (1 5/8-2 1/4)⁽⁴⁾ 6.1 (240) 24-26 425 9.1 (20.0) 7.6 (16.7) 83
3/32 in (2.4 mm) DC+ 41-54 (1 5/8-2 1/4)⁽⁴⁾ 7.6 (300) 27-29 475 11.3 (25.0) 9.5 (21.0) 84
3/32 in (2.4 mm) DC+ 41-54 (1 5/8-2 1/4)⁽⁴⁾ 10.2 (400) 33-35 525 15.2 (33.4) 12.7 (28.0) 83