Menu Cerrar
Lincoln Stainless Cut Length TIG Electrode

Diámetros / Embalaje

Diámetros
mm 		10 lb (4.5 kg) Plastic Tube
1/8 in (3.2 mm) ED034913
1/16 in (1.6 mm) ED034911
3/32 in (2.4 mm) ED034912

Lincoln® ER308/308LCF

Soldadura de Arco Eléctrico con Tungsteno y Gas (GTAW) | ED034912

CLASIFICACIONES:
ER308
ER308L

Lincoln ER308/308LCF Bajo contenido de ferrita (rango de 3 a 6).

Diámetro

Seleccionar diámetro

  • 1/8 in (3.2 mm)
  • 1/16 in (1.6 mm)
  • 3/32 in (2.4 mm)

Paquete

Desencadenar

  • 10 lb (4.5 kg) Plastic Tube

Detalles

LINCOLN® ER308/308LCF provides controlled low ferrite (range 3-6), exceeds 15 mils (0.38mm) of lateral expansion and Charpy V-notch test results are capable of exceeding 27 J (20 ft·lbf) @ -196°C (-320°F).

Características

  • Controlled Low Ferrite (Range 3-6)
  • Charpy V-Notch test results capable of exceeding 27 J (20 ft•lbf) @ -196°C (-320°F)
  • Exceeds 15 mils (0.38 mm) of lateral expansion at -196°C (-320°F)
  • Batch Managed Inventory
  • Ink jet printing identification on entire length of electrode
  • Q2 Lot® - Certificates showing actual wire composition, ferrite number, and impact properties tested at -196°C (-320°F) available online

Servicio de información

ANTES DE USARLO, LEA Y COMPRENDA LA HOJA DE DATOS DE SEGURIDAD (SDS) DE ESTE PRODUCTO Y LA INFORMACIÓN ESPECÍFICA IMPRESA EN EL ENVASE DEL PRODUCTO. Página de Búsqueda SDS

Ver los resultados de la prueba de limitación de responsabilidad

CONFORMANCE

CONFORMANCES SPECIFICATION CLASSIFICATION
AWS AWS A5.9 ER308, ER308L

MECHANICAL PROPERTIES

Classification Shielding Gas Elongation
% 		Tensile Strength
MPa (ksi) 		Yield Strength @ 0.2% Offset
MPa (ksi) 		Charpy V-Notch
J (ft-lbs) @ -196°C (-320°F) 		Lateral Expansion
mil @ -196 °C (-320 °F)
Typical Result, As-welded 100% Ar 42 610 (89) 440 (64) 61-131 (45-97) 39-59

WIRE COMPOSITION

Classification %C %Cr %Cu %Mn %Mo %N %Nb %Ni %P %S %Si Ferrite Number (Delong ©) Ferrite Number (WRC-1992 ©)
ER308 Requirement 0.08 max. 19.5 - 22.0 0.75 max. 1.0 - 2.5 0.75 max. Info. Only Info. Only 9.0 - 11.0 0.03 max. 0.03 max. 0.30 - 0.65 Info. Only Info. Only
ER308L Requirement 0.03 max. 19.5 - 22.0 0.75 max. 1.0 - 2.5 0.75 max. Info. Only Info. Only 9.0 - 11.0 0.03 max. 0.03 max. 0.30 - 0.65 Info. Only Info. Only
Typical Result 0.02 19.5-20.0 0.02-0.20 1.6-1.8 0.02-0.18 0.01-0.09 0.02 max. 10.5-10.9 0.01-0.02 0.01-0.02 0.40-0.53 3-7 4-9