Detalles
- A nickel-bearing electrode with 1/2% molybdenum
- Can be used for higher strength weldments where impact properties exceeding 27 J (20 ft·lbf) at -62°C (-80°F) are required
- Suitable for use where consumables with less than 1% Ni are required
Características
- A nickel-bearing electrode with 1/2% molybdenum
- Can be used for higher strength weldments where impact properties exceeding 27 J (20 ft•lbf) at -62°C (-80°F) are required
- Suitable for use where consumables with less than 1% Ni are required
- Actual (Type 3.1) certificates for each lot of wire showing chemical composition are available in the certificate center of lincolnelectric.com
Servicio de información
ANTES DE USARLO, LEA Y COMPRENDA LA HOJA DE DATOS DE SEGURIDAD (SDS) DE ESTE PRODUCTO Y LA INFORMACIÓN ESPECÍFICA IMPRESA EN EL ENVASE DEL PRODUCTO. Página de Búsqueda SDS
Ver los resultados de la prueba de limitación de responsabilidad
WIRE COMPOSITION
| Classification | %C | %Mn | %Mo | %Ni | %P | %S | %Si | %Total Cu |
|---|---|---|---|---|---|---|---|---|
| EF3 Requirement | 0.10 - 0.18 | 1.50 - 2.40 | 0.40 - 0.65 | 0.70 - 1.10 | 0.025 max. | 0.025 max. | 0.30 max. | 0.35 max. |
| S3Ni1Mo Requirement | 0.07 - 0.15 | 1.30 - 1.80 | 0.45 - 0.65 | 0.80 - 1.20 | 0.020 max. | 0.020 max. | 0.05 - 0.35 | |
| Typical Result | 0.12 | 1.79 | 0.52 | 0.84 | 0.008 | 0.005 | 0.23 | 0.07 |