Menu Cerrar
50 lb Can of Lincoln Electric Stick Electrodes

Diámetros / Embalaje

Diámetros
mm 		(3) 10 lb Easy Open Can
 50 lb Easy Open Can
2.5 x 305 mm (3/32 x 12 in) ED032609
3.2 x 355 mm (1/8 x 14 in) ED032610 ED030848
4.0 x 355 mm (5/32 x 14 in) ED032611 ED030849

Pipeliner® 6P+

Soldadura de Arco Metálico Protegido (SMAW) | ED030849

CLASIFICACIONES:
E6010

Pipeliner® 6P+, Buena apariencia y control para el operador

Diámetro

Seleccionar diámetro

  • 2.5 x 305 mm (3/32 x 12 in)
  • 3.2 x 355 mm (1/8 x 14 in)
  • 4.0 x 355 mm (5/32 x 14 in)

Paquete

Desencadenar

  • (3) 10 lb Easy Open Can
  • 50 lb Easy Open Can

Detalles

Designed for vertical down welding of cross-country and in-plant pipe

Características

  • Q2 Lot® - Lot Controlled Chemistry and Mechanical Properties
  • Standard in the pipe welding industry for root pass
  • High operator appeal and control
  • Easy slag removal
  • Meets NACE MR0175 for sour gas applications
  • Test data available for SSC (NACE TM0177) & HIC (NACE TM0284)

Servicio de información

También puede necesitar

50 lb Can of Lincoln Electric Stick Electrodes

Fleetweld® 5P+

ED010281
K2394-1-Stick Electrode Holder & Cable Assembly Kit

Stick Electrode Holder and Cable Assembly (Twist Mate™)

K2394-1
K875 Accessory Kit

Accessory Kit - 150 Amp

K875
50 lb Can of Lincoln Electric Stick Electrodes

Pipeliner® 6P+

ED030848
Ver todo

ANTES DE USARLO, LEA Y COMPRENDA LA HOJA DE DATOS DE SEGURIDAD (SDS) DE ESTE PRODUCTO Y LA INFORMACIÓN ESPECÍFICA IMPRESA EN EL ENVASE DEL PRODUCTO. Página de Búsqueda SDS

Ver los resultados de la prueba de limitación de responsabilidad

CONFORMANCE

CONFORMANCES SPECIFICATION CLASSIFICATION
AWS AWS A5.1 E6010
ISO ISO 2560-A E 42 3 C 2 1
ABS AWS A5.1 E6010
CWB CSA W48 E4310
DNV-GL DNV - 2.9 3

MECHANICAL PROPERTIES

Classification Yield Strength @ 0.2% Offset
MPa (ksi) 		Tensile Strength
MPa (ksi) 		Elongation
% 		Charpy V-Notch
J (ft-lbs) @ -30°C (-20°F) 		Hardness Rockwell B
E6010 Requirement 330 (48) min. 410 (60) min. 22 min. 27 (20) min.
Typical Result, As-welded 400-560 (59-81) 490-670 (72-98) 22-33 29-113 (21-83) 84-86

DEPOSIT COMPOSITION

Classification %C %Cr %Mn %Mo %Ni %P %S %Si %V
E6010 Requirement 0.20 max. 0.20 max. 1.20 max. 0.30 max. 0.30 max. 1.00 max. 0.08 max.
Typical Result 0.10-0.20 0.01-0.04 0.43-0.73 0.03 max. 0.07 max. 0.003-0.012 0.003-0.014 0.12-0.30 0.01 max.

TYPICAL OPERATING PROCEDURES

Diameter Polarity⁽¹⁾ Current
Amps
2.5 mm (3/32 in) DC+ 50-85
2.5 mm (3/32 in) DC- 50-85
3.2 mm (1/8 in) DC+ 75-135
3.2 mm (1/8 in) DC- 75-135
4.0 mm (5/32 in) DC+ 100-175
4.0 mm (5/32 in) DC- 100-175

NOTES

Note
⁽¹⁾ Preferred polarity is listed first.