Menu Close
Fleetweld 5P 14 Stick Electrode in 10 lb cans"

Diameters / Packaging

Diameters
 8 lb (3.6 kg) Easy Open Can
 10 lb (4.5 kg) Easy Open Can
1/8 x 14 in (3.2 x 350 mm) ED033094
3/16 x 14 in (4.8 x 350 mm) ED033096
3/32 x 12 in (2.4 x 300 mm) ED033097
5/32 x 14 in (4.0 x 350 mm) ED033095

Excalibur® 309/309L-16 Stick (SMAW) Electrode

Stick (SMAW) | ED033096

AWS:
AWS A5.4 : E309-16
AWS A5.4 : E309L-16

EXCALIBUR® 309/309L-16 is designed for joining stainless steel to mind or low alloy steel, typical application on industrial and general fabrication. All, welding positions except vertical down (Stainless)

Diamètre

Sélectionnez le diamètre

  • 1/8 x 14 in (3.2 x 350 mm)
  • 3/16 x 14 in (4.8 x 350 mm)
  • 3/32 x 12 in (2.4 x 300 mm)
  • 5/32 x 14 in (4.0 x 350 mm)

Paquet

Sélectionnez un forfait

  • 10 lb (4.5 kg) Easy Open Can
Acheter maintenant

Détails

EXCALIBUR® 309/309L-16 has a flux coating that produces smooth arc transfer during welding.

Traits

  • Electrode coating provides smooth arc transfer in all welding positions, except vertical down
  • Q2 Lot® - Certificate showing actual deposit composition and ferrite number (FN) by ferrite scope available online

Disclaimers

Warning -

Cancer and Reproductive Harm -

www.P65Warnings.ca.gov

Des informations de service

Vous pourriez également avoir besoin

Red Line Traditional MIG Stick Welding Gloves

Gants de soudage à l’électrode MIG classiques

K2979-ALL
Fleetweld 5P 14 Stick Electrode in 10 lb cans"

Excalibur® 308L-16 Stick (SMAW) Electrode

ED033082
Fleetweld 5P 14 Stick Electrode in 10 lb cans"

Excalibur® 308/308H-16 Stick (SMAW) Electrode

ED033086
Fleetweld 5P 14 Stick Electrode in 10 lb cans"

Excalibur® 308/308L-17 Stick (SMAW) Electrode

ED033092
Voir tout

BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page

See test result disclaimer

CONFORMANCE

CONFORMANCES SPECIFICATION CLASSIFICATION
AWS AWS A5.4 E309-16, E309L-16
ABS AWS A5.4 E309-16, E309L-16
CWB CSA W48 E309-16, E309L-16

MECHANICAL PROPERTIES

Classification Yield Strength @ 0.2% Offset
MPa (ksi) 		Tensile Strength
MPa (ksi) 		Elongation
%
E309-16 Requirement 550 (80) min. 30 min.
E309L-16 Requirement 520 (75) min. 30 min.
Typical Result, As-welded 470-490 (68-71) 600-610 (87-88) 32-42

DEPOSIT COMPOSITION

Classification %Bi %C %Cr %Cu %Mn %Mo %N %Ni %P %S %Si Ferrite Number (per AWS A4.2)
E309-16 Requirement 0.15 max. 22.0 - 25.0 0.75 max. 0.5 - 2.5 0.75 max. 12.0 - 14.0 0.04 max. 0.03 max. 1.00 max.
E309L-16 Requirement 0.04 max. 22.0 - 25.0 0.75 max. 0.5 - 2.5 0.75 max. 12.0 - 14.0 0.04 max. 0.03 max. 1.00 max.
Typical Result 0.001 0.03-0.04 23.8-24.6 0.04-0.08 1.4-1.7 0.08-0.40 0.06-0.10 12.7-13.4 0.02-0.03 0.01-0.02 0.36-0.55 9-16

TYPICAL OPERATING PROCEDURES

Diameter Polarity⁽¹⁾ Current
Amps
3/32 in (2.4 mm) DC+ 40-70
3/32 in (2.4 mm) AC 40-70
1/8 in (3.2 mm) DC+ 60-100
1/8 in (3.2 mm) AC 60-100
5/32 in (4.0 mm) DC+ 90-140
5/32 in (4.0 mm) AC 90-140
3/16 in (4.8 mm) DC+ 120-185
3/16 in (4.8 mm) AC 120-185

NOTES

Note
⁽¹⁾ Preferred polarity is listed first.