Menu Close
Submerged Arc Family

Diameters / Packaging

Diameters
 50 lb Bag
 550 lb Drum
Flux ED027866 ED028322

Lincolnweld® 880™

Submerged Arc Welding (SAW)

Neutral welding flux for use with solid and cored electrodes with greater than 0.20% Si for joining and hardafacing applications

Diamètre

Sélectionnez le diamètre

  • Flux

Paquet

Sélectionnez un forfait

  • 50 lb Bag
  • 550 lb Drum
Acheter maintenant

Détails

Traits

  • Can be used for both joining and hardfacing welding
  • Optimal bead appearance when used with solid low alloy steel electrodes with a minimum of 0.20% silicon
  • Use with both solid and flux cored wires
  • Actual (Type 3.1) certificates for each lot of flux showing chemical composition, particle size and moisture level are available in the certificate center of lincolnelectric.com
  • Low Alloy Steel Lincolnweld® LA-75, LA-90, LA-100, LAC-B2, LAC-M2, LAC-Ni2

Applications typiques

  • Applications requiring smooth bead appearance
  • Hardfacing applications

Caractéristiques spéciales

  • Basicity Index: 2.0 Density: 1.4 g/cm3

Disclaimers

Warning -

Cancer and Reproductive Harm -

www.P65Warnings.ca.gov

Des informations de service

Vous pourriez également avoir besoin

600A 5/64 SUB ARC GUN & CABLE-15FT

600A Submerged Arc Welding Gun 5/64" - K113-1

K113-1
MAXsa® 29 Feed Head

Tête d’alimentation MAXsa 29

K2312-2
MAXsa 22 Feed Head

Tête d’alimentation MAXsa 22

K2370-2
500 lb Accu-Trak Drum, 600 lb Accu- Trak Drum, 1000 Accu-Pak Drum

Lincore® 420 Metal-Cored Submerged Arc (SAW) Wire

ED015268
Voir tout

BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page

See test result disclaimer

MECHANICAL PROPERTIES

Wire Classification Postweld Heat Treatment Yield Strength @ 0.2% Offset
MPa (ksi) 		Tensile Strength
MPa (ksi) 		Elongation
% 		Charpy V-Notch
J (ft-lbs) @ -30°C (-20°F) 		Charpy V-Notch
J (ft-lbs) @ -40°C (-40°F) 		Charpy V-Notch
J (ft-lbs) @ -62°C (-80°F)
Lincolnweld® LA-100 F9A4-EM2-M2-H8 As-welded 640 (93) 700 (102) 25 125 (92)
Lincolnweld® LA-75 F7A8-ENi1K-Ni1-H8 As-welded 430 (62) 540 (78) 28 107 (79)
Lincolnweld® LA-90 F8A4-EA3K-A4-H8 As-welded 590 (86) 680 (99) 25 100 (74)
Lincolnweld® LAC-B2 F8P2-ECB2-B2-H8 1 hour @ 690°C (1275°F) 500 (72) 610 (88) 24 149 (110)

DEPOSIT COMPOSITION

Wire Classification %C %Cr %Cu %Mn %Mo %Ni %P %S %Si %Ti+V+Zr Diffusible Hydrogen
mL/100g Weld Metal
Lincolnweld® LA-100 F9A4-EM2-M2-H8 0.05 0.07 1.28 0.41 1.76 0.007 0.004 0.51 0.02 7
Lincolnweld® LA-75 F7A8-ENi1K-Ni1-H8 0.06 0.05 0.10 0.79 0.01 0.85 0.013 0.007 0.58 0.01 5
Lincolnweld® LA-90 F8A4-EA3K-A4-H8 0.08 0.10 1.36 0.47 0.009 0.005 0.65 6
Lincolnweld® LAC-B2 F8P2-ECB2-B2-H8 0.09 1.37 0.03 0.71 0.62 0.013 0.001 0.39 7

FLUX COMPOSITION

Classification %Al2O3 %CaF2 %CaO %MgO %Na2O %SiO2 %ZrO2 %Metal Alloys
Typical Result 15 27 1 30 2 17 7 1