Menu Close
Techalloy Stainless TIG Cut Length Consumables

Diameters / Packaging

Diameters
 10 lb (4.5 kg) Plastic Tube
1/8 in (3.2 mm) TG625125638
1/16 in (1.6 mm) TG625062638
3/32 in (2.4 mm) TG625093638
5/32 in (4.0 mm) TG625156638

Techalloy® 625 TIG (GTAW) Cut Lengths

TIG (GTAW) | TG625062638

AWS:
AWS ERNiCrMo-3

TECHALLOY® 625 Tungsten Inert Gas Rod designed for MIG, TIG and SAW welding of nickel-chromium-molybdenum cladding alloys. This filler metal may be used for cladding and welding dissimilar base metals such as Ni-Cr-Mo alloys to stainless and carbon steels.

Diamètre

Sélectionnez le diamètre

  • 1/8 in (3.2 mm)
  • 1/16 in (1.6 mm)
  • 3/32 in (2.4 mm)
  • 5/32 in (4.0 mm)

Paquet

Sélectionnez un forfait

  • 10 lb (4.5 kg) Plastic Tube
Acheter maintenant

Détails

TECHALLOY® 625 is designed to match the composition and properties of alloy 625. The Ni-Cr-Mo alloy system provides excellent resistance to oxidizing and reducing environments, with the high molybdenum content providing good stress, pitting and crevice corrosion resistance.

Traits

  • Designed to match the composition and properties of Alloy 633
  • The Ni-Cr-Mo alloy system provides excellent resistance to oxidizing and reducing environments
  • The high molybdenum content provides good stress, pitting and crevice corrosion resistance
  • Most popular nickel alloy for cladding
  • Provides high temperature strength and structural stability
  • Q2 Lot® - Certificate showing actual wire composition available online

Disclaimers

Warning -

Cancer and Reproductive Harm -

www.P65Warnings.ca.gov

Des informations de service

BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page

See test result disclaimer

CONFORMANCE

CONFORMANCES SPECIFICATION CLASSIFICATION
AWS AWS A5.14 ERNiCrMo-3
ABS AWS A5.14 ERNiCrMo-3
CWB AWS A5.14 ERNiCrMo-3
MIL MIL-E-21562E RN625

WIRE COMPOSITION

Classification %Al %C %Cr %Cu %Fe %Mn %Mo %P %S %Si %Ti %Nb+Ta %Ni+Co
ERNiCrMo-3 Requirement 0.40 max. 0.10 max. 20.0 - 23.0 0.50 max. 5.0 max. 0.50 max. 8.0 - 10.0 0.02 max. 0.015 max. 0.50 max. 0.40 max. 3.15 - 4.15 58.0 min.
Typical Result 0.08-0.1 0.02 max. 21.7-22.4 0.01 max. 0.3-0.4 0.04 max. 8.6-8.8 0.003 max. 0.001-0.003 0.14 max. 0.17-0.22 3.46-3.86 64.8