Wprowadzenie
SuperGlaze 5356 to drut aluminiowy z dodatkiem magnezu, przeznaczony do spawania stopów podawanych obróbce cieplnej np. stopów 5xxx i 6xxx. W porównaniu ze stopami 4XXX, wyższa wytrzymałość kolumnowa i mniejszy prąd spawania przy tej samej prędkości podawania drutu.
Zalety
- Drut 5356 klasy Premium.
- Zalecany do spawania półautomatycznego
- Stabilny łuk i łatwa kontrola jeziorka spawalniczego
BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. Strona wyszukiwania kart SDS
CONFORMANCE
| CONFORMANCES | SPECIFICATION | CLASSIFICATION |
|---|---|---|
| AWS | AWS A5.10 | ER5356 |
MECHANICAL PROPERTIES
| Classification | Shielding Gas | Polarity |
Tensile Strength
MPa (ksi) |
|---|---|---|---|
| ER5356 Requirement | Not Specified | Not Specified | 240 (35) min. |
| Typical Result, As-welded | 100% Ar | DC+ | 250-290 (36-42) |
WIRE COMPOSITION
| Classification | %Al | %Be | %Cr | %Fe | %Mg | %Mn | %Si | %Ti | %Total Cu | %Zn |
|---|---|---|---|---|---|---|---|---|---|---|
| ER5356 Requirement | Remainder | 0.0003 max. | 0.05 - 0.20 | 0.40 max. | 4.5 - 5.5 | 0.05 - 0.20 | 0.25 max. | 0.06 - 0.20 | 0.10 max. | 0.10 max. |
| Typical Result | Remainder | 0.0002 | 0.12 | 0.09 | 4.9 | 0.12 | 0.06 | 0.09 | 0.00 | 0.00 |
TYPICAL OPERATING PROCEDURES
| Diameter | Shielding Gas |
Gas Flow
L/min (CFH) |
Polarity |
CTWD
mm (in.) |
Wire Feed Speed
m/min (in/min) |
Voltage
volts |
Approx. Current
amps |
|---|---|---|---|---|---|---|---|
| Typical Result | 100% Ar | 25 (53) | DC+ | 16 (⁵/₈) | 18 (709) | 23.3 | 180 |
| Typical Result | 100% Ar | 25 (53) | DC+ | 16 (⁵/₈) | 13 (512) | 24.3 | 210 |
| Typical Result | 100% Ar | 25 (53) | DC+ | 19 (³/₄) | 9 (354) | 25.1 | 280 |