DETALII
5183 este proiectat pentru a suda aliaje cu magneziu pentru a indeplini cerintele de rezistenta la tractiune mai ridicate. Utilizati materiale de baza 5083 si 5654 atunci cand rezistenta la tractiune este de 276MPa sau mai mare. Aplicatiile tipice sunt inindustria maritima si criogenica si fabricarea structurilor din aluminiu de inaltarezistenta.
Caracteristici
- Transfer uniform prin arc, pentru cele mai exigente aplicatii de sudare ale aliajului 5183
- Stabilitate a arcului si avans al sarmei optime
- Dezvoltata pentru utilizarea usoara a bobinelor la sudarea semiautomata
- Alumencare optima
Aplicații tipice
- Fabricarea si reparatiile navelor maritime
- Tancuri criogenice
- Constructii navale si alte aplicatiistructurale din aluminiu de inaltarezistenta
- Vagoane
- Industria offshore
Gaz protector
- I1 : Gaz inert Ar (100%), I3 : Gaz inert Ar+ 0,5-95% He, Debit : 14-24 l/min (Argon)
Caracteristici speciale
- Q2 Lot® Certificate - Certified Material Test Report showing actual wire composition
Informații despre service
BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. Pagina de căutare FDS
CONFORMANCE
| CONFORMANCES | SPECIFICATION | CLASSIFICATION |
|---|---|---|
| AWS | AWS A5.10 | ER5183 |
| ABS | AWS A5.10 | ER5183 |
| BV | AWS A5.10 | ER5183 |
| CCS | AWS A5.10 | ER5183 |
| CWB | AWS A5.10 | ER5183 |
| DB | AWS A5.10 | ER5183 |
| DNV-GL | AWS A5.10 | ER5183 |
| KR | AWS A5.10 | ER5183 |
| LR | AWS A5.10 | ER5183 |
| RINA | AWS A5.10 | ER5183 |
| TUV | AWS A5.10 | ER5183 |
MECHANICAL PROPERTIES
| Classification | Shielding Gas | Polarity |
Tensile Strength
MPa (ksi) |
|---|---|---|---|
| ER5183 Requirement | Not Specified | Not Specified | 275 (40) min. |
| Typical Result, As-welded | 100% Ar | DC+ | 280-310 (41-45) |
WIRE COMPOSITION
| Classification | %Al | %Be | %Cr | %Fe | %Mg | %Mn | %Si | %Ti | %Total Cu | %Zn |
|---|---|---|---|---|---|---|---|---|---|---|
| ER5183 Requirement | Remainder | 0.0003 max. | 0.05 - 0.25 | 0.40 max. | 4.3 - 5.2 | 0.50 - 1.0 | 0.40 max. | 0.15 max. | 0.10 max. | 0.25 max. |
| Typical Result | Remainder | 0.0002 | 0.07 | 0.13 | 4.9 | 0.6 | 0.05 | 0.07 | 0.00 | 0.00 |
TYPICAL OPERATING PROCEDURES
| Diameter | Shielding Gas |
Gas Flow
L/min (CFH) |
Polarity |
CTWD
mm (in.) |
Wire Feed Speed
m/min (in/min) |
Voltage
volts |
Approx. Current
amps |
|---|---|---|---|---|---|---|---|
| Typical Result | 100% Ar | 25 (53) | DC+ | 16 (⁵/₈) | 18 (709) | 23.3 | 180 |
| Typical Result | 100% Ar | 25 (53) | DC+ | 16 (⁵/₈) | 13 (512) | 24.3 | 210 |
| Typical Result | 100% Ar | 25 (53) | DC+ | 19 (³/₄) | 9 (354) | 25.1 | 280 |