LN-25X® Wire Feeders with CrossLinc® Technology and TVT
Model
Select Model
-
Extra Torque w/CrossLinc® and TVT (No Flowmeter, Tweco)
LN-25X Extra Torque model with CrossLinc Technology feeds up to 3/32 dia wire.
K4267-5
-
w/CrossLinc® and TVT (No Flowmeter, Tweco®)
LN-25X with CrossLinc Technology and TVT
K4267-2
-
w/CrossLinc® and TVT (with Flowmeter, Twistmate®/Dinse®)
LN-25X with CrossLinc Technology
K4267-4
-
w/CrossLinc® and TVT (with Flowmeter,Tweco®)
LN-25X with CrossLinc Technology
K4267-3
-
LN-25X TVT K126PRO 5/64-1/16 ONE-PAK
LN-25X with CrossLinc Technology and TVT. One-Pak includes Innershield gun and drive rolls for field construction applications.
K4266-2
-
LN-25X w/TVT Magnum® 400 045C One-Pak
LN-25X portable feeder can be used as an across the arc wire feeder but allows for remote voltage control when used with a CrossLinc compatible power source. TVT compensates for voltage drop and assures you get the voltage you set.
K4266-3
-
LN-25X w/TVT Magnum®Curve 300A 045 One-Pak
LN-25X with CrossLinc Technology and TVT and Magnum Pro Curve 300 gun (15ft, .045)
K4266-1
Lincoln Electric Business Partner?
Sign in to view your priceDETAILS
FULL CONTROL OF YOUR SYSTEM WITH NO CONTROL CABLES
Safety
- Reduce job site clutter by removing cumbersome control cables
- Eliminate unnecessary movement of personnel across the worksite
- Eliminate the need to drag control cables around the site
Quality
- Full voltage control at the feeder results in the correct settings for every weld
- Accurately compensate for voltage drop across long cable runs
- Eliminate unintentional machine adjustments
Productivity
- Set up faster with fewer cable connections
- Eliminate helpers or trips to the power source when making setting adjustments
- Minimize rework with easy settings adjustment
Reliability
- Fully encapsulated and environmentally protected electronics
- Replaceable flame resistant case can be installed in under five minutes
CROSSLINC™ TECHNOLOGY: SOLVING SITE WELDING ISSUES
Worker safety, weld quality, productivity and equipment reliability come to mind when welding on site or on large structures. In these environments, it is typical for the operator to work closely with a rugged, compact and lightweight wire feeder, connected to a weather-resistant power source hundreds of feet away. Until now, portable wire feeders have been available in two configurations: basic across-the-arc models or portable feeders equipped with an added control cable.
Across-the-arc models are powered by the weld cable. This configuration provides benefits of fewer cables running back to the power source, but voltage control at the point-of-use is not possible.
The addition of a control cable to the system allows the operator to adjust voltage at the point-of-use, but these cables can be costly and add additional complexity to the production environment.
There has to be a better way.
Features
- CrossLinc technology provides voltage control on the feeder when paired with a CrossLinc compatible power source. No control cables are needed.
- TVT compensates for voltage drop across long weld cable lengths, allowing you to weld with the voltage you set at the feeder
- Included Tweco® or Twistmate®(Dinse®) input power connection. Flowmeter and non-flowmeter models available.
- Portable and light weight field construction wire feeder