DETAILS
LINCOREĀ® 410 Metal-Cored Submerged Arc Wire is Soft and easily machined, typical applications on caster rolls. Recommended primary 802 and secondary 860 standard flux are not sized for semiautomatic applications; however, they can be ordered in special sizing by contacting your Lincoln Electric representative.
Features
- Metal-cored wire with a 410 martensitic stainless steel deposit
- Low carbon content and high corrosion resistance
- Soft and easily machined
Typical Applications
- Caster rolls
- Drum, Extrusion, Kiln
- Mine Car, Power Generation, Rail
- Roll, Shovel, Tractor
- Wheel
Welding Positions
- Flat/Horizontal
Disclaimers
Service Information
You May Also Need
BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page
See test result disclaimer
MECHANICAL PROPERTIES
Flux | Classification | Hardness Rockwell C |
---|---|---|
Lincolnweld® 801® | Typical Result | 27-32 |
DEPOSIT COMPOSITION
Flux | Classification | %C | %Cr | %Mn | %Ni | %Si |
---|---|---|---|---|---|---|
Lincolnweld® 801® | Typical Result | 0.08 | 12.5 | 0.8 | 0.2 | 0.4 |
TYPICAL OPERATING PROCEDURES
Diameter | Polarity |
Wire Feed Speed
m/min (in/min) |
Voltage
volts |
Approx. Current
amps |
---|---|---|---|---|
3/32 in (2.4 mm) | DC+ | 1.7 (65) | 24 | 250 |
3/32 in (2.4 mm) | DC+ | 3.0 (120) | 28 | 375 |
3/32 in (2.4 mm) | DC+ | 4.4 (175) | 31 | 450 |
5/32 in (4.0 mm) | DC+ | 1.4 (55) | 27 | 475 |
5/32 in (4.0 mm) | DC+ | 2.2 (85) | 30 | 650 |
5/32 in (4.0 mm) | DC+ | 2.9 (115) | 32 | 800 |