Diameters / Packaging
|
Diameters |
(3) 8 lb Easy Open Can |
(3) 10 lb Easy Open Can |
|---|---|---|
| 1/8 x 14 in (3.2 x 350 mm) | EL55125634 | |
| 3/32 x 12 in (2.4 x 300 mm) | EL55093632 | |
| 5/32 x 14 in (4.0 x 350 mm) | EL55156634 |
DETAILS
Tech-Rod® offers a wide variety of nickel alloy grades of stick electrodes lot tested with certificates of actual deposit chemistry and typical mechanical results available online
Features
- The welds are moderately hard and require carbide tipped tools for machining
- A preheat and inter-pass temperature of not less than 350°F is required during welding to prevent cracking
- Q2 Lot® - certificates showing actual deposit composition available online
Typical Applications
- Maintenance and Repair
- Repair of Castings
- Welding of ductile, pliable cast irons
- Dissimilar welds to nickel alloys, carbon steels, and low-alloy steels
Welding Positions
- Polarity DC+
Shielding Gas
- N/A
Disclaimers
Service Information
BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page
See test result disclaimer
CONFORMANCE
| CONFORMANCES | SPECIFICATION | CLASSIFICATION |
|---|---|---|
| AWS | AWS A5.15 | ENiFe-CI |
DEPOSIT COMPOSITION
| Classification | %Al | %C | %Cu | %Fe | %Mn | %S | %Si | %Ni+Co |
|---|---|---|---|---|---|---|---|---|
| ENiFe-CI Requirement | 1.0 max. | 2.0 max. | 2.5 max. | Remainder | 2.5 max. | 0.03 max. | 4.0 max. | 45 - 60 |
| Typical Result | 0.5 | 1.3 | 1.1 | 46 | 0.4 | 0.00 | 1.0 | 50 |
TYPICAL OPERATING PROCEDURES
| Diameter |
Current
Amps |
|---|---|
| 3/32" (2.4 mm) | 65-85 |
| 1/8" (3.2 mm) | 80-110 |
| 5/32" (4.0 mm) | 110-140 |