Menu Close
UltraCore, 50 lb Fiber Spool

Diameters / Packaging

Diameters
 (4) 15 lb Plastic Spool
 33 lb Spool
 33 lb Spool Buy America
 50 lb Coil Buy America
 50 lb Spool
 50 lb Spool Buy America
 500 lb Accu-Trak® Drum
0.045 in (1.1 mm) ED033756 ED033755 ED037485 ED033757
0.052 in (1.3 mm) ED033759 ED033758 ED037486 ED033760 ED034376
1/16 in (1.6 mm) ED033762 ED033761 ED037487 ED036529 ED033763 ED037488 ED033785

UltraCore® HD-C

Flux-Cored Gas-Shielded (FCAW-G)

CLASSIFICATIONS:
E71T-9C-H8
E71T1-C1A2-CS1-H8

UltraCore® HD-C from Lincoln Electric is a mild steel, gas-shielded flux-cored wire designed for the shipbuilding industry to provide high deposition rates and flat bead appearance.

Diameter

Select Diameter

  • 0.045 in (1.1 mm)
  • 0.052 in (1.3 mm)
  • 1/16 in (1.6 mm)

Package

Select Package

  • (4) 15 lb Plastic Spool
  • 33 lb Spool
  • 33 lb Spool Buy America
  • 50 lb Coil Buy America
  • 50 lb Spool
  • 50 lb Spool Buy America
  • 500 lb Accu-Trak® Drum
Buy Now

DETAILS

A high deposition, all position E71T1 gas-shielded flux-cored electrode. Designed with a fast-freezing slag to make it easy for the operator to weld at high deposition rates, even when welding out-of-position. Intended for use with 100%CO2 shielding gas.

Features

  • High Deposition Rates – increase weld deposition up to 10 lbs/hr out-of-position
  • Flat Bead Appearance – fast freezing slag for a flat bead shape and increased productivity in all positions, including vertical up
  • Wide Operating Range – operators can set the machine on a single setting and weld in all positions
  • Little or No Pre-Weld Clean up Required – weld over light rust, mill scale, and primer

Typical Applications

  • Shipbuilding
  • Structural Fabrication
  • General fabrication

Welding Positions

  • All

Shielding Gas

  • 100% CO2

Disclaimers

Warning -

Cancer and Reproductive Harm -

www.P65Warnings.ca.gov

Service Information

BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page

See test result disclaimer

CONFORMANCE

CONFORMANCES SPECIFICATION CLASSIFICATION
AWS AWS A5.20 E71T-1C-H8, E71T-9C-H8
AWS AWS A5.36 E71T1-C1A2-CS1-H8
ABS ABS - Part 2 3YSA H10
CWB CSA W48 E491T1-C1A2-CS1-H8 (E491T-1-H8), E491T1-C1A3-CS1-H8 (E491T-9-H8)
DNV-GL DNV - 2.9 II YMS H10, III YMS H10
LR LR - Chapter 11 3YM H10, 3YS H10

MECHANICAL PROPERTIES

Classification Shielding Gas Polarity Yield Strength @ 0.2% Offset
MPa (ksi) 		Tensile Strength
MPa (ksi) 		Elongation
% 		Charpy V-Notch
J (ft-lbs) @ -20°C (0°F) 		Charpy V-Notch
J (ft-lbs) @ -30°C (-20°F)
E71T-1C-H8 Requirement 100% CO2 DC+ 400 (58) min. 480-660 (70-95) 22 min. 27 (20) min.
E71T-9C-H8 Requirement 100% CO2 DC+ 400 (58) min. 480-660 (70-95) 22 min. 27 (20) min.
E71T1-C1A2-CS1-H8 Requirement 100% CO2 DC+ 400 (58) min. 480-660 (70-95) 22 min. 27 (20) min.
Typical Result, As-welded 100% CO2 DC+ 510 (74) 580-640 (84-93) 22 47-84 (35-62) 31-115 (23-85)

DEPOSIT COMPOSITION

Classification Shielding Gas Polarity %B %C %Mn %P %S %Si Diffusible Hydrogen
mL/100g Weld Metal
E71T-1C-H8 Requirement 100% CO2 DC+ 0.12 max. 1.75 max. 0.03 max. 0.03 max. 0.90 max. 8.0 max.
E71T-9C-H8 Requirement 100% CO2 DC+ 0.12 max. 1.75 max. 0.03 max. 0.03 max. 0.90 max. 8.0 max.
E71T1-C1A2-CS1-H8 Requirement 100% CO2 DC+ 0.12 max. 1.75 max. 0.030 max. 0.030 max. 0.90 max. 8 max.
Typical Result 100% CO2 DC+ 0.0033-0.005 0.03-0.06 1.36-1.60 0.01-0.02 0.005-0.01 0.38-0.45 4.4-7.7

TYPICAL OPERATING PROCEDURES

Diameter Shielding Gas Polarity CTWD
mm (in.)⁽¹⁾ 		Wire Feed Speed
m/min (in/min) 		Voltage
volts 		Approx. Current
amps 		Melt-off Rate
kg/hr (lb/hr) 		Deposition Rate
kg/hr (lb/hr) 		Efficiency
%
0.045 in (1.1 mm) 100% CO2 DC+ 19-25 (3/4-1) 4.4 (175) 22-25 145 1.8 (3.9) 1.5 (3.4) 85-87
0.045 in (1.1 mm) 100% CO2 DC+ 19-25 (3/4-1) 6.4 (250) 23-28 185 2.5 (5.6) 2.2 (4.8) 85-87
0.045 in (1.1 mm) 100% CO2 DC+ 19-25 (3/4-1) 7.6 (300) 24-30 215 3.1 (6.8) 2.6 (5.8) 85-87
0.045 in (1.1 mm) 100% CO2 DC+ 19-25 (3/4-1) 8.9 (350) 25-31 235 3.6 (7.9) 3.1 (6.8) 85-87
0.045 in (1.1 mm) 100% CO2 DC+ 19-25 (3/4-1) 10.2 (400) 27-32 255 4.1 (9.0) 3.5 (7.8) 85-87
0.045 in (1.1 mm) 100% CO2 DC+ 19-25 (3/4-1) 11.4 (450) 28-33 280 4.6 (10.1) 4.0 (8.8) 85-87
0.045 in (1.1 mm) 100% CO2 DC+ 19-25 (3/4-1) 12.7 (500) 27-33 300 5.1 (11.3) 4.4 (9.8) 85-87
0.045 in (1.1 mm) 100% CO2 DC+ 19-25 (3/4-1) 14.0 (550) 28-33 315 5.6 (12.4) 4.9 (10.8) 85-87
0.045 in (1.1 mm) 100% CO2 DC+ 19-25 (3/4-1) 15.2 (600) 30-35 335 6.1 (13.5) 5.3 (11.7) 85-87
0.052 in (1.3 mm) 100% CO2 DC+ 19-25 (3/4-1) 3.8 (150) 22-25 155 2.1 (4.7) 1.7 (3.8) 81-85
0.052 in (1.3 mm) 100% CO2 DC+ 19-25 (3/4-1) 5.1 (200) 23-26 190 2.9 (6.3) 2.4 (5.2) 81-85
0.052 in (1.3 mm) 100% CO2 DC+ 19-25 (3/4-1) 6.4 (250) 23-27 225 3.5 (7.8) 3.0 (6.5) 81-85
0.052 in (1.3 mm) 100% CO2 DC+ 19-25 (3/4-1) 7.6 (300) 24-29 265 4.3 (9.4) 3.6 (7.9) 81-85
0.052 in (1.3 mm) 100% CO2 DC+ 19-25 (3/4-1) 8.9 (350) 26-30 285 5.0 (11.0) 4.2 (9.2) 81-85
0.052 in (1.3 mm) 100% CO2 DC+ 19-25 (3/4-1) 9.5 (375) 27-30 310 5.3 (11.7) 4.5 (9.9) 81-85
0.052 in (1.3 mm) 100% CO2 DC+ 19-25 (3/4-1) 10.8 (425) 28-32 325 6.0 (13.3) 5.1 (11.2) 81-85
0.052 in (1.3 mm) 100% CO2 DC+ 19-25 (3/4-1) 12.1 (475) 29-33 345 6.8 (14.9) 5.7 (12.6) 81-85
0.052 in (1.3 mm) 100% CO2 DC+ 19-25 (3/4-1) 12.7 (500) 30-34 360 7.1 (15.6) 6.0 (13.3) 81-85
1/16 in (1.6 mm) 100% CO2 DC+ 19-25 (3/4-1) 3.8 (150) 21-26 195 2.9 (6.4) 2.4 (5.3) 84-87
1/16 in (1.6 mm) 100% CO2 DC+ 19-25 (3/4-1) 4.4 (175) 22-27 245 3.4 (7.5) 2.9 (6.3) 84-87
1/16 in (1.6 mm) 100% CO2 DC+ 19-25 (3/4-1) 5.1 (200) 22-27 260 3.9 (8.5) 3.3 (7.2) 84-87
1/16 in (1.6 mm) 100% CO2 DC+ 19-25 (3/4-1) 5.7 (225) 23-28 290 4.4 (9.6) 3.7 (8.1) 84-87
1/16 in (1.6 mm) 100% CO2 DC+ 19-25 (3/4-1) 6.4 (250) 24-29 310 4.8 (10.6) 4.1 (9.1) 84-87
1/16 in (1.6 mm) 100% CO2 DC+ 19-25 (3/4-1) 7.6 (300) 25-30 330 5.8 (12.7) 4.9 (10.9) 84-87
1/16 in (1.6 mm) 100% CO2 DC+ 19-25 (3/4-1) 8.3 (325) 25-30 365 6.3 (13.8) 5.4 (11.9) 84-87
1/16 in (1.6 mm) 100% CO2 DC+ 19-25 (3/4-1) 8.9 (350) 26-30 390 6.7 (14.8) 5.8 (12.8) 84-87
1/16 in (1.6 mm) 100% CO2 DC+ 19-25 (3/4-1) 10.2 (400) 27-31 405 7.7 (16.9) 6.7 (14.7) 84-87

NOTES

Note
⁽¹⁾ To estimate ESO, subtract 1/4 in. (6.0 mm) from CTWD.