Diameters / Packaging
|
Diameters |
40lb master pack (10lb Cartons) |
|---|---|
| 1/8 | ED022003 |
| 3/16 | ED022007 |
| 5/32 | ED022005 |
DETAILS
Low Alloy steels designed for rebuilding of carbon or low alloy parts used in applications involving non-lubricated rolling or sliding metal-to-metal wear.
Features
- Can be used on carbon and low alloy steel parts
- Deposits tend to cross check and are usually best limited to two layers
- General purpose electrode, a good compromise for metal-to-metal wear, moderate impact and mild abrasion
Typical Applications
- Boom heels, Conveyor screws
- Dipper lips, Tractor grousers
- Ditcher teeth, Lumber equipment
- Hammer mills
Welding Positions
- Flat/Horizontal
Disclaimers
Service Information
Documentation
You May Also Need
BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page
See test result disclaimer
MECHANICAL PROPERTIES
| Classification | Number of layer | Hardness Rockwell C |
|---|---|---|
| Typical Result | 1 Layer | 50 |
| Typical Result | 2 Layers | 54 |
DEPOSIT COMPOSITION
| Classification | Base Metal | Number of layer | %C | %Cr | %Mn | %Mo | %Si |
|---|---|---|---|---|---|---|---|
| Typical Result | Mild Steel | 2 Layers | 0.9 | 9.5 | 0.4 | 0.6 | 0.4 |
TYPICAL OPERATING PROCEDURES
| Diameter | Polarity |
Current
Amps |
|---|---|---|
| 1/8" (3.2 mm) | AC | 70-120 |
| 1/8" (3.2 mm) | DC+ | 70-120 |
| 5/32" (4.0 mm) | AC | 110-150 |
| 5/32" (4.0 mm) | DC+ | 110-150 |
| 3/16" (4.8 mm) | AC | 150-200 |
| 3/16" (4.8 mm) | DC+ | 150-200 |