Detalles
LINCOLNWELD® 316/316L has a 2-3% molybdenum content which improves pitting corrosion resistance of the weld deposit, while the low carbon content reduces the possibility of carbide precipitation and intergranular corrosion.
Características
- Designed to be used primarily with basic fluxes that recover nearly all of the wire chromium in the deposit
- Low carbon content recommended where there is a risk of intergranular corrosion
- The 2-3% molybdenum improves pitting corrosion resistance of the weld deposit
- Low carbon content reduces the possibility of carbide precipitation and intergranular corrosion
- Q2 Lot® - Certificate showing actual wire composition and calculated ferrite number (FN) available online
Servicio de información
ANTES DE USARLO, LEA Y COMPRENDA LA HOJA DE DATOS DE SEGURIDAD (SDS) DE ESTE PRODUCTO Y LA INFORMACIÓN ESPECÍFICA IMPRESA EN EL ENVASE DEL PRODUCTO. Página de Búsqueda SDS
Ver los resultados de la prueba de limitación de responsabilidad
CONFORMANCE
| CONFORMANCES | SPECIFICATION | CLASSIFICATION |
|---|---|---|
| AWS | AWS A5.9 | ER316, ER316L |
| ISO | ISO 14343-B | SS316L |
| ABS | AWS A5.9 | ER316, ER316L |
| CWB | CSA W48 | ER316, ER316L |
| MIL | MIL-E-19933E AMD1 | MIL-316L |
MECHANICAL PROPERTIES
| Flux | Classification |
Yield Strength @ 0.2% Offset
MPa (ksi) |
Tensile Strength
MPa (ksi) |
Elongation
% |
|---|---|---|---|---|
| Lincolnweld® P2007™ | Typical Result | 390 (57) | 559 (81) | 39 |
WIRE COMPOSITION
| Classification | %C | %Cr | %Cu | %Mn | %Mo | %N | %Nb | %Ni | %P | %S | %Si | Ferrite Number (Delong ©) | Ferrite Number (WRC-1992 ©) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ER316L Requirement | 0.03 max. | 18.0 - 20.0 | 0.75 max. | 1.0 - 2.5 | 2.0 - 3.0 | Info. Only | Info. Only | 11.0 - 14.0 | 0.03 max. | 0.03 max. | 0.30 - 0.65 | Info. Only | Info. Only |
| Typical Result | 0.01-0.02 | 18.5-19.1 | 0.03-0.13 | 1.4-1.8 | 2.2-2.6 | 0.03-0.04 | 0.01 max. | 11.8-12.3 | 0.02 | 0.01 max. | 0.32-0.40 | 8-12 | 7-11 |
TYPICAL OPERATING PROCEDURES
| Diameter |
Wire Feed Speed
m/min (in/min) |
Voltage
volts |
Approx. Current
amps |
|---|---|---|---|
| 5/64 in (2.0 mm) | 2.0-6.1 (80-240) | 24-30 | 190-500 |
| 3/32 in (2.4 mm) | 1.5-5.3 (60-210) | 26-32 | 195-575 |
| 1/8 in (3.2 mm) | 0.9-2.8 (35-110) | 28-34 | 200-700 |
| 5/32 in (4.0 mm) | 0.8-1.9 (30-75) | 30-36 | 320-775 |