Menu Cerrar
Flux Packaging

Diámetros / Embalaje

Diámetros
mm 		50 lb Plastic Bag
Flux ED031596

Lincolnweld® 888

Soldadura por arco sumergido (SAW) | ED031596

Lincolnweld 888 esta diseñado para eliminar escoria en ranura profunda en aplicaciones críticas, contiene niveles bajos de hidrógeno difusible H4, empaque resistente a la humedad.

Diámetro

Seleccionar diámetro

  • Flux

Paquete

Desencadenar

  • 50 lb Plastic Bag

Detalles

  • Designed for deep groove slag removal in critical applications
  • Recommended for joining mild steel and low alloy steels in as-welded and stress-relieved applications
  • Low H4 diffusible hydrogen levels
  • Moisture resistant packaging
  • Charpy V-Notch and CTOD test results available for most alloy systems

Características

  • Designed for deep groove slag removal in critical applications
  • Low H4 diffusible hydrogen levels
  • Moisture resistant packaging
  • Charpy V-Notch and CTOD test results available for most alloy systems
  • Actual (Type 3.1) certificates for each lot of flux showing chemical composition, particle size and moisture level are available in the certificate center of lincolnelectric.com

Servicio de información

Documentación

También puede necesitar

NA-5 Control

Caja de Control NA-5

K356-2
NA-4 Control Box

Caja de Control NA-4

K388-2
LT-7 Tractor

Tractor LT-7 (modelo de pistas)

K395-1
Submerged Arc Wire

Lincolnweld® LA-71

ED011051
Ver todo

ANTES DE USARLO, LEA Y COMPRENDA LA HOJA DE DATOS DE SEGURIDAD (SDS) DE ESTE PRODUCTO Y LA INFORMACIÓN ESPECÍFICA IMPRESA EN EL ENVASE DEL PRODUCTO. Página de Búsqueda SDS

Ver los resultados de la prueba de limitación de responsabilidad

MECHANICAL PROPERTIES

Wire Classification Postweld Heat Treatment Yield Strength @ 0.2% Offset
MPa (ksi)⁽¹⁾ 		Tensile Strength
MPa (ksi) 		Elongation
% 		Charpy V-Notch
J (ft-lbs) @ -30°C (-20°F) 		Charpy V-Notch
J (ft-lbs) @ -40°C (-40°F) 		Charpy V-Notch
J (ft-lbs) @ -50°C (-60°F) 		Charpy V-Notch
J (ft-lbs) @ -62°C (-80°F) 		Charpy V-Notch
J (ft-lbs) @ -73°C (-100°F)
Lincolnweld® L-50® F7A8-EM13K-H4 As-welded 460 (66) 540 (79) 30 99 (73)
Lincolnweld® L-56® F7P8-EH11K-H4 1 hour @ 620°C (1150°F) 420 (61) 560 (81) 33 60 (44)
Lincolnweld® L-56® F8A6-EH11K-G-H4 As-welded 520 (75) 630 (91) 26 133 (98)
Lincolnweld® L-61® F7A6-EM12K-H4 As-welded 430 (62) 500 (73) 32 316 (233)
Lincolnweld® L-70 F7A4-EA1-A2-H4 As-welded 510 (74) 600 (87) 29 61 (45)
Lincolnweld® L-70 F7P4-EA1-A2-H4 480 (69) 570 (83) 31 73 (54)
Lincolnweld® LA-100 F10A4-EM2-M2-H4 As-welded 650 (95) 740 (107) 22 34 (25)
Lincolnweld® LA-71 F7A6-EM14K-H4 As-welded 500 (72) 590 (86) 28 130 (96)
Lincolnweld® LA-71 F7P8-EM14K-H4 1 hour @ 620°C (1150°F) 430 (63) 570 (82) 31 136 (100)
Lincolnweld® LA-75 F7A8-ENi1K-Ni1-H4 As-welded 430 (62) 550 (80) 31 141 (104)
Lincolnweld® LA-84 (LNS 164) F8P6-EF3-F3-H4 1 hour @ 620°C (1150°F) 570 (82) 650 (95) 25 132 (97)
Lincolnweld® LA-84 (LNS 164) F9A8-EF3-F3-H4 As-welded 620 (90) 720 (104) 21 72 (53)
Lincolnweld® LA-84 (LNS 164) F9P6-EF3-F3-H4 1 hour @ 620°C (1150°F) 570 (82) 650 (95) 25 132 (97)
Lincolnweld® LA-85 (LNS 165) F7P6-ENi5-Ni5-H4 1 hour @ 620°C (1150°F) 490 (71) 590 (86) 28 96 (71)
Lincolnweld® LA-85 (LNS 165) F8A6-ENi5-Ni5-H4 As-welded 530 (77) 620 (90) 27 111 (82)
Lincolnweld® LA-90 F9A6-EA3K-A3-H4 As-welded 560 (81) 680 (99) 24 47 (35)
Lincolnweld® LA-92 (LNS 150) F8P2-EB2R-B2R 1 hour @ 690°C (1275°F) 500 (72) 600 (87) 27 122 (90)
Lincolnweld® LA-93 (LNS 151) F9P2-EB3R-B3R 1 hour @ 690°C (1275°F) 550 (80) 650 (95) 22 127 (94)
Lincolnweld® LAC-690 F11P6-ECG-G-H4 1 hour @ 620°C (1150°F) 740 (107) 810 (117) 21 88 (65)
Lincolnweld® LAC-690 F12A10-ECG-G-H4 As-welded 830 (121) 880 (128) 18 84 (62)
Lincolnweld® LAC-M2 F12A8-ECG-G-H8 As-welded 780 (113) 860 (125) 17 68 (50)
Lincolnweld® L-S3 (LNS133U,L50M) F6P8-EH12K-H4 1 hour @ 620°C (1150°F) 410 (59) 540 (78) 32 153 (113)
Lincolnweld® L-S3 (LNS133U,L50M) F7A8-EH12K-H4 As-welded 470 (68) 570 (82) 29 194 (143)

DEPOSIT COMPOSITION

Wire Classification %As %B %C %Cr %Cu %Mn %Mo %Ni %P %S %Sb %Si %Sn %Ti %Ti+V+Zr Diffusible Hydrogen
mL/100g Weld Metal
Lincolnweld® L-50® F7A8-EM13K-H4 0.0038 0.07 0.10 1.35 0.008 0.006 0.61 2
Lincolnweld® L-56® F7P8-EH11K-H4 0.0045 0.07 0.07 1.76 0.007 0.003 0.93 2
Lincolnweld® L-56® F8A6-EH11K-G-H4 0.0045 0.07 0.05 0.07 1.71 0.00 0.02 0.007 0.003 0.94 2
Lincolnweld® L-61® F7A6-EM12K-H4 0.06 0.05 1.15 0.008 0.007 0.41 2
Lincolnweld® L-70 F7A4-EA1-A2-H4 0.07 0.11 0.94 0.53 0.010 0.007 0.44 4
Lincolnweld® L-70 F7P4-EA1-A2-H4 0.06 0.11 0.95 0.52 0.010 0.006 0.42 4
Lincolnweld® LA-100 F10A4-EM2-M2-H4 0.0034 0.06 0.11 0.09 1.68 0.40 1.77 0.009 0.005 0.60 0.02 2
Lincolnweld® LA-71 F7A6-EM14K-H4 0.0039 0.08 0.09 1.29 0.008 0.005 0.64 0.02 2
Lincolnweld® LA-71 F7P8-EM14K-H4 0.0040 0.07 0.10 1.29 0.007 0.004 0.65 0.03 2
Lincolnweld® LA-75 F7A8-ENi1K-Ni1-H4 0.0037 0.07 0.04 0.10 1.19 0.00 0.78 0.008 0.005 0.66 0.01 2
Lincolnweld® LA-84 (LNS 164) F9A8-EF3-F3-H4 0.0037 0.07 0.09 1.74 0.46 0.75 0.011 0.007 0.47 3
Lincolnweld® LA-84 (LNS 164) F9P6-EF3-F3-H4 0.0037 0.05 0.07 1.73 0.47 0.74 0.010 0.007 0.44 3
Lincolnweld® LA-85 (LNS 165) F7P6-ENi5-Ni5-H4 0.0029 0.06 0.11 1.50 0.20 0.80 0.011 0.006 0.38 2
Lincolnweld® LA-85 (LNS 165) F8A6-ENi5-Ni5-H4 0.0029 0.08 0.11 1.51 0.20 0.79 0.010 0.006 0.38 2
Lincolnweld® LA-90 F9A6-EA3K-A3-H4 0.0040 0.09 0.11 1.62 0.43 0.005 0.010 0.65 2
Lincolnweld® LA-92 (LNS 150) F8P2-EB2R-B2R 0.002 0.0030 0.09 1.16 0.08 1.00 0.53 0.010 0.006 0.001 0.37 0.001
Lincolnweld® LA-93 (LNS 151) F9P2-EB3R-B3R 0.002 0.0030 0.07 2.32 0.10 0.80 0.95 0.008 0.005 0.001 0.32 0.001
Lincolnweld® LAC-690 F11P6-ECG-G-H4 0.0019 0.09 0.40 0.04 1.41 0.42 2.55 0.011 0.008 0.32 1
Lincolnweld® LAC-690 F12A10-ECG-G-H4 0.0018 0.10 0.40 0.04 1.40 0.43 2.55 0.011 0.009 0.31 1
Lincolnweld® LAC-M2 F12A8-ECG-G-H8 0.0040 0.10 0.10 0.06 1.51 0.56 1.78 0.010 0.004 0.59 6
Lincolnweld® L-S3 (LNS133U,L50M) F6P8-EH12K-H4 0.08 0.09 1.53 0.010 0.007 0.47 2
Lincolnweld® L-S3 (LNS133U,L50M) F7A8-EH12K-H4 0.08 0.09 1.56 0.009 0.006 0.48 2

FLUX COMPOSITION

Classification %Al2O3 %CaF2 %CaO %FeO %K2O %MgO %MnO %Na2O %SiO2 %TiO2 %ZrO2 %Metal Alloys
Typical Result 21 21 4 1 2 29 2 2 17 1 0 2