Menu Close
SuperGlide MIG wire, Steel Spool

Diameters / Packaging

Diameters
 (4) 15 lb Plastic Spool
 33 lb Spool
 60 lb Coil
 600 lb Accu-Trak® Drum
0.045 in (1.1 mm) ED029418 ED029201 ED029202
0.052 in (1.3 mm) ED029419 ED029204 ED029205
1/16 in (1.6 mm) ED029206 ED029207 ED029387

Outershield® 71 Elite

Flux-Cored Gas-Shielded (FCAW-G) | ED029201

AWS:
E71T-9C-H8
E71T-9M-H8
E71T1-C1A2-CS1-H8
E71T1-M21A2-CS1-H8

L’Outershield® 71 Elite de Lincoln Electric a un transfert d’arc fluide, de faibles éclaboussures et une bonne apparence de cordon.

Diamètre

Sélectionnez le diamètre

  • 0.045 in (1.1 mm)
  • 0.052 in (1.3 mm)
  • 1/16 in (1.6 mm)

Paquet

Sélectionnez un forfait

  • (4) 15 lb Plastic Spool
  • 33 lb Spool
  • 60 lb Coil
Acheter maintenant

Détails

Un transfert d’arc fluide, de faibles éclaboussures et une bonne apparence de cordon en font une électrode de qualité supérieure. Les opérateurs apprécieront l'arc bien dirigé avec un transfert de petites billes.

Traits

  • Transfert d'arc en douceur et faibles éclaboussures
  • Conçu pour le soudage avec un gaz de protection 100 % CO2 ou 75 - 82 % d’argon/reste de CO2
  • Bonne apparence du cordon de soudure
  • Laitier à congélation rapide pour un soudage hors position
  • Conforme aux exigences de la norme AWS D1.8 sur la dérogation de lot sismique
  • Notes: AWS D1.8 structural steel seismic supplement test data can be found at the Lincoln Electric Certificate Center.

Disclaimers

Warning -

Cancer and Reproductive Harm -

www.P65Warnings.ca.gov

Des informations de service

Vous pourriez également avoir besoin

Magnum 400 MIG Gun

Magnum® 400 Welding Guns

K471-21
Outershield Wire, 25 LB Plastic Spool

Outershield® 71M

ED022659
Accu-Trak Drum

Outershield® 71M Flux-cored (FCAW-G) Wire

ED027364
Innershield/Outershield/Submerged Arc Wire

Outershield® 71 Elite

ED029202
Voir tout

BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page

See test result disclaimer

CONFORMANCE

CONFORMANCES SPECIFICATION CLASSIFICATION
AWS AWS A5.20 E71T-1C-H8, E71T-1M-H8, E71T-9C-H8, E71T-9M-H8
AWS AWS A5.36 E71T1-C1A2-CS1-H8, E71T1-M21A2-CS1-H8
ABS ABS - Part 2 3YSA H10
CWB CSA W48 E491T1-C1A3-CS1-H8 (E491T-9-H8), E491T1-GA3-CS1-H8 (E491T-9M-H8), E491T1-M20A3-CS1-H8 (E491T-9M-H8), E491T1-M21A3-CS1-H8 (E491T-9M-H8)
DNV-GL DNV - 2.9 III YMS H10
LR LR - Chapter 11 3YS H10

MECHANICAL PROPERTIES

Classification Shielding Gas Polarity Yield Strength @ 0.2% Offset
MPa (ksi) 		Tensile Strength
MPa (ksi) 		Elongation
% 		Charpy V-Notch
J (ft-lbs) @ -30°C (-20°F)
E71T-9C-H8 Requirement 100% CO2 DC+ 400 (58) min. 480-660 (70-95) 22 min. 27 (20) min.
E71T-9M-H8 Requirement 75-80% Ar, balance CO2 DC+ 400 (58) min. 480-660 (70-95) 22 min. 27 (20) min.
E71T1-C1A2-CS1-H8 Requirement 100% CO2 DC+ 400 (58) min. 480-660 (70-95) 22 min. 27 (20) min.
E71T1-M21A2-CS1-H8 Requirement M21-ArC DC+ 400 (58) min. 480-660 (70-95) 22 min. 27 (20) min.
Typical Result, As-welded 100% CO2 DC+ 560 (81) 610 (89) 30 38-46 (28-34)
Typical Result, As-welded 75% Ar, 25% CO2 DC+ 590 (86) 650 (95) 25 89-95 (66-70)

DEPOSIT COMPOSITION

Classification Shielding Gas Polarity %B %C %Mn %P %S %Si Diffusible Hydrogen
mL/100g Weld Metal
E71T-9C-H8 Requirement 100% CO2 DC+ 0.12 max. 1.75 max. 0.03 max. 0.03 max. 0.90 max. 8.0 max.
E71T-9M-H8 Requirement 75-80% Ar, balance CO2 DC+ 0.12 max. 1.75 max. 0.03 max. 0.03 max. 0.90 max. 8.0 max.
E71T1-C1A2-CS1-H8 Requirement 100% CO2 DC+ 0.12 max. 1.75 max. 0.030 max. 0.030 max. 0.90 max. 8 max.
E71T1-M21A2-CS1-H8 Requirement M21-ArC DC+ 0.12 max. 1.75 max. 0.030 max. 0.030 max. 0.90 max. 8 max.
Typical Result 100% CO2 DC+ 0.0050 0.06 1.21 0.01 0.011 0.41 4.2
Typical Result 75% Ar, 25% CO2 DC+ 0.0060 0.06 1.45 0.01 0.01 0.59 5.7

TYPICAL OPERATING PROCEDURES

Diameter Shielding Gas Polarity CTWD
mm (in.) 		Wire Feed Speed
m/min (in/min) 		Voltage
volts 		Approx. Current
amps 		Melt-off Rate
kg/hr (lb/hr) 		Deposition Rate
kg/hr (lb/hr) 		Efficiency
%
0.045 in (1.1 mm) 75% Ar / 25% CO2 DC+ 19 (3/4) 4.5 (175) 21-24 130 1.7 (3.8) 1.5 (3.3) 87
0.045 in (1.1 mm) 75% Ar / 25% CO2 DC+ 19 (3/4) 6.4 (250) 23-26 155 2.4 (5.4) 2.1 (4.7) 87
0.045 in (1.1 mm) 75% Ar / 25% CO2 DC+ 19 (3/4) 7.6 (300) 24-27 180 2.9 (6.4) 2.5 (5.6) 87
0.045 in (1.1 mm) 75% Ar / 25% CO2 DC+ 19 (3/4) 8.9 (350) 25-28 205 3.4 (7.6) 3.0 (6.6) 87
0.045 in (1.1 mm) 75% Ar / 25% CO2 DC+ 19 (3/4) 10.2 (400) 26-29 230 4.0 (8.7) 3.5 (7.6) 87
0.045 in (1.1 mm) 75% Ar / 25% CO2 DC+ 19 (3/4) 12.8 (500) 27-30 260 5.0 (10.9) 4.3 (9.5) 87
0.045 in (1.1 mm) 75% Ar / 25% CO2 DC+ 19 (3/4) 15.3 (600) 28-31 290 6.0 (13.1) 5.2 (11.4) 87
0.052 in (1.3 mm) 75% Ar / 25% CO2 DC+ 19 (3/4) 3.8 (150) 21-24 150 2.1 (4.6) 1.8 (3.9) 86
0.052 in (1.3 mm) 75% Ar / 25% CO2 DC+ 19 (3/4) 5.1 (200) 22-25 180 2.8 (6.1) 2.4 (5.2) 86
0.052 in (1.3 mm) 75% Ar / 25% CO2 DC+ 19 (3/4) 6.4 (250) 23-26 210 3.4 (7.6) 3.0 (6.5) 86
0.052 in (1.3 mm) 75% Ar / 25% CO2 DC+ 19 (3/4) 7.6 (300) 24-27 240 4.8 (10.6) 4.1 (7.8) 86
0.052 in (1.3 mm) 75% Ar / 25% CO2 DC+ 19 (3/4) 10.2 (400) 26-28 315 6.2 (13.7) 5.4 (10.5) 86
0.052 in (1.3 mm) 75% Ar / 25% CO2 DC+ 19 (3/4) 12.8 (500) 28-31 335 6.9 (15.2) 6.0 (13.1) 86
1/16 in (1.6 mm) 75% Ar / 25% CO2 DC+ 19 (3/4) 3.2 (125) 21-24 190 2.4 (5.2) 2.0 (4.4) 85
1/16 in (1.6 mm) 75% Ar / 25% CO2 DC+ 19 (3/4) 3.8 (150) 22-25 205 2.8 (6.2) 2.4 (5.3) 85
1/16 in (1.6 mm) 75% Ar / 25% CO2 DC+ 19 (3/4) 5.1 (200) 22-26 240 3.8 (8.3) 3.2 (7.0) 85
1/16 in (1.6 mm) 75% Ar / 25% CO2 DC+ 19 (3/4) 6.4 (250) 23-27 290 4.7 (10.3) 4.0 (8.8) 85
1/16 in (1.6 mm) 75% Ar / 25% CO2 DC+ 19 (3/4) 7.6 (300) 24-28 325 5.6 (12.4) 4.8 (10.5) 85
1/16 in (1.6 mm) 75% Ar / 25% CO2 DC+ 19 (3/4) 10.2 (400) 27-31 400 7.5 (16.5) 6.4 (14.0) 85