Menu Close
Image not found

Diameters / Packaging

Diameters
 33 lb Spool
 44 lb Spool
0.035 in (0.9 mm) ED037003 ED037004
0.045 in (1.1 mm) ED037005 ED037006

SuperArc® L-52 MIG (GMAW) Wire

MIG (GMAW) | ED037003

AWS:
ER70S-2

Lincoln Electric's triple deoxidized premium copper coated MIG wire, SuperArc® L-52® is an excellent choice for making high quality, high toughness welds, even when welding over rust and mill scale

Diamètre

Sélectionnez le diamètre

  • 0.035 in (0.9 mm)
  • 0.045 in (1.1 mm)

Paquet

Sélectionnez un forfait

  • 33 lb Spool
  • 44 lb Spool
Acheter maintenant

Détails

Lincoln Electric's triple deoxidized premium copper coated MIG wire, SuperArc® L-52® is an excellent choice for making high quality, high toughness welds, even when welding over rust and mill scale

Traits

  • A triple deoxidized (Aluminum, Titanium, Zirconium)ER70S-2 solid wire designed for welding over rust and mill scale without sacrificing welding quality
  • Very low Nitrogen in the steel makes it easy to achieve impact resistance above 70 ft•lbs @ -20F
  • MicroGuard® Ultra provides superior feeding, arc stability and improved protection against corrosion
  • Other characteristic features include excellent start properties, extremely low contact tip wear, low levels of spatter and fume emission
  • Preferred for all position welding of different sizes of pipe

Disclaimers

Warning -

Cancer and Reproductive Harm -

www.P65Warnings.ca.gov

Des informations de service

Vous pourriez également avoir besoin

NA-5 Control

Contrôle NA-5

K356-2
NA-4 Control Box

NA-4 Controller

K388-2
LT-7 Tractor

Tracteur LT-7 (modèle sur chenilles)

K395-1
T4F SAE-500

Lincolnweld® 860®

ED019589
Voir tout

BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page

See test result disclaimer

CONFORMANCE

CONFORMANCES SPECIFICATION CLASSIFICATION
AWS AWS A5.18 ER70S-2

MECHANICAL PROPERTIES

Classification Shielding Gas Polarity Yield Strength @ 0.2% Offset
MPa (ksi) 		Tensile Strength
MPa (ksi) 		Elongation
% 		Charpy V-Notch
J (ft-lbs) @ -30°C (-20°F)
ER70S-2 Requirement 100% CO2 DC+ 400 (58) min. 480 (70) min. 22 min. 27 (20) min.
Typical Result, As-welded 100% CO2 DC+ 440 (63) 520 (76) 30 104-156 (77-115)

WIRE COMPOSITION

Classification %Al %C %Cr %Mn %Mo %Ni %P %S %Si %Ti %V %Zr %Total Cu
ER70S-2 Requirement 0.05 - 0.15 0.07 max. 0.15 max. 0.90 - 1.40 0.15 max. 0.15 max. 0.025 max. 0.035 max. 0.40 - 0.70 0.05 - 0.15 0.03 max. 0.02 - 0.12 0.50 max.
Typical Result 0.07 0.04 0.06 1.10 0.01 0.03 0.003 0.003 max. 0.59 0.10 0.01 0.03 0.21

TYPICAL OPERATING PROCEDURES

Diameter Shielding Gas Polarity CTWD
mm (in.)⁽¹⁾ 		Wire Feed Speed
m/min (in/min) 		Voltage
volts 		Approx. Current
amps 		Melt-off Rate
kg/hr (lb/hr)
0.035 in (0.9 mm) 100% CO2 DC+ 12-19 (1/2-3/4) 5.6-19.8 (220-780) 19-31 105-320 1.6-5.7 (3.6-12.6)
0.045 in (1.1 mm) 100% CO2 DC+ 12-19 (1/2-3/4) 5.1-15.2 (200-600) 19-31 145-360 2.4-7.2 (5.3-15.9)

NOTES

Note
⁽¹⁾ CTWD (Contact Tip to Work Distance). Subtract 1/4 in. (6.4 mm) to calculate Electrical Stickout.