Menu Close
Accu-Trak Drum

Diameters / Packaging

Diameters
 (5) 2 lb Plastic Spool
 12.5 lb Spool
 12.5 LB SPOOL
 33 lb Plastic Spool
 33 lb Steel Spool
 44 lb Fiber Spool
 44 LB SPOOL
 44 lb Spool Buy America
 44 lb Steel Spool
 60 lb Fiber Spool
 60 lb Spool
 60 lb Spool Buy America
 250 lb Accu-Trak® Drum
 450 LB All Fiber drum
 500 lb Accu-Pak® Box
 500 lb Accu-Trak® Drum
 500 LB DRUM
 500 lb Infinity-Pak
 500 lb Speed Feed® Drum
 900 lb Accu-Pak® Box
 900 lb Accu-Pak® Box Buy America
 1000 lb Accu-Pak® Box
 1000 lb Accu-Trak® Drum
 1000 LB DRUM
 1000 lb Infinity-Pak
 1000 lb Precise-Trak® Reel
0.025 in (0.6 mm) ED015790
0.030 IN ED561111
0.030 in (0.8 mm) ED030631 ED023334 ED032926 ED030771
0.035 IN ED561117 ED561006 ED561178 ED561207
0.035 in (0.9 mm) ED030632 ED032927 ED031411 ED021274 ED025945 ED021275 ED029914 ED032904 ED021056 ED034394 ED032847 ED034429 ED028827 ED033271
0.040 IN ED561014
0.040 in (1.0 mm) ED027384
0.045 IN ED561114 ED561007 ED561208
0.045 in (1.1 mm) ED029042 ED032928 ED031412 ED021276 ED033703 ED025946 ED021277 ED029915 ED032906 ED020532 ED561179 ED032849 ED028828 ED036633
0.052 IN ED561008 ED561194
0.052 in (1.3 mm) ED021278 ED021279 ED561711 ED032907 ED020533 ED032850 ED029084
1/16 in (1.6 mm) ED037356 ED037357 ED029225 ED032851

SuperArc® L-56®

MIG (GMAW) | ED561178

AWS:
ER70S-6

Le fil MIG SuperArc® L-56® de Lincoln Electric, revêtu de cuivre de qualité supérieure, est un excellent choix pour le soudage sur des métaux avec une présence de calamine moyenne à élevée.

Diamètre

Sélectionnez le diamètre

  • 0.025 in (0.6 mm)
  • 0.030 IN
  • 0.030 in (0.8 mm)
  • 0.035 IN
  • 0.035 in (0.9 mm)
  • 0.040 IN
  • 0.040 in (1.0 mm)
  • 0.045 IN
  • 0.045 in (1.1 mm)
  • 0.052 IN
  • 0.052 in (1.3 mm)
  • 1/16 in (1.6 mm)

Paquet

Sélectionnez un forfait

  • 12.5 LB SPOOL
  • 44 LB SPOOL
  • 500 LB DRUM
  • 1000 LB DRUM
Acheter maintenant

Détails

Le fil MIG SuperArc® L-56® de Lincoln, revêtu de cuivre de qualité supérieure, est un excellent choix pour le soudage sur des métaux avec une présence de calamine moyenne à élevée.

Traits

  • Les niveaux élevés de désoxydants au manganèse et au silicium tolèrent les surfaces à teneur en calamine moyenne à élevée
  • Excellent humidification du fond de soudure pour une apparence optimale du cordon
  • Revêtement en cuivre pour une longue durée de vie de la pointe de contact
  • Prend en charge le transfert par court-circuit, le transfert globulaire, le transfert par pulvérisation axiale et le transfert par pulvérisation pulsée
  • Disponible pour se conformer aux dispositions Buy America. Choisissez un produit Buy America MTS dans la liste des types disponibles ou contactez un représentant Lincoln Electric

Disclaimers

Warning -

Cancer and Reproductive Harm -

www.P65Warnings.ca.gov

Des informations de service

Vous pourriez également avoir besoin

Magnum Pro 250 MIG Welding gun

Magnum® PRO 350 Welding Guns

K2652-2-10-45
Magnum Pro 250 MIG Welding gun

Magnum® PRO 450 Welding Guns

K2653-2-10-45
LF-74 Wire Feeder, Base Model

Tête de soudage LF-74, modèle de base

K2426-4
Accu-Trak Drum

SuperArc® L-56® MIG (GMAW) Wire

ED028827
Voir tout

BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page

See test result disclaimer

CONFORMANCE

CONFORMANCES SPECIFICATION CLASSIFICATION
AWS AWS A5.18 ER70S-6
ABS ABS - Part 2 3YSA, 3YSA H5
CWB CSA W48 B-G 49A 3 C1 S6, B-G 49A 3 C1 S6 (B-G 49A 3 C G6), B-G 49A 3 Z S6
DNV-GL DNV - 2.9 III YMS H5
DB ISO 14341-A G 42 3 C1 3Si1, G 46 4 M21 3Si1
LR LR - Chapter 11 3YS H5
MIL MIL-E-23765/1D MIL-70S-6

MECHANICAL PROPERTIES

Classification Shielding Gas Polarity Yield Strength @ 0.2% Offset
MPa (ksi) 		Tensile Strength
MPa (ksi) 		Elongation
% 		Charpy V-Notch
J (ft-lbs) @ -30°C (-20°F) 		Charpy V-Notch
J (ft-lbs) @ -40°C (-40°F)
ER70S-6 Requirement 100% CO2 DC+ 400 (58) min. 480 (70) min. 22 min. 27 (20) min.
Typical Result, As-welded 100% CO2 DC+ 420 (61) 530-570 (77-82) 25 43-121 (32-89)
Typical Result, As-welded 75% Ar, 25% CO2 DC+ 430 (62) 530-600 (77-86) 23 62-182 (46-135) 42-156 (31-115)
Typical Result, As-welded 90% Ar, 10% CO2 DC+ 490 (71) 600 (87) 24 87-109 (64-80)

WIRE COMPOSITION

Classification %C %Cr %Mn %Mo %Ni %P %S %Si %V %Total Cu
ER70S-6 Requirement 0.06 - 0.15 0.15 max. 1.40 - 1.85 0.15 max. 0.15 max. 0.025 max. 0.035 max. 0.80 - 1.15 0.03 max. 0.50 max.
Typical Result 0.07-0.10 0.01-0.05 1.41-1.58 0.01 max. 0.03 max. 0.003-0.013 0.013 max. 0.80-0.98 0.005 max. 0.13-0.29

TYPICAL OPERATING PROCEDURES

Diameter Transfer Mode Shielding Gas Polarity CTWD
mm (in.)⁽¹⁾ 		Wire Feed Speed
m/min (in/min) 		Voltage
volts 		Approx. Current
amps 		Melt-off Rate
kg/hr (lb/hr)
0.025 in (0.6 mm) Short Circuit Transfer 100% CO2 DC+ 9-12 (3/8-1/2) 2.5 (100) 17 35 0.4 (0.9)
0.025 in (0.6 mm) Short Circuit Transfer 100% CO2 DC+ 9-12 (3/8-1/2) 6.4 (250) 19 80 0.9 (2.0)
0.030 in (0.8 mm) Short Circuit Transfer 100% CO2 DC+ 9-12 (3/8-1/2) 1.9 (75) 17 35 0.4 (0.9)
0.030 in (0.8 mm) Short Circuit Transfer 100% CO2 DC+ 9-12 (3/8-1/2) 3.8 (150) 18 70 0.8 (1.8)
0.030 in (0.8 mm) Short Circuit Transfer 100% CO2 DC+ 9-12 (3/8-1/2) 7.6 (300) 22 130 1.6 (3.6)
0.035 in (0.9 mm) Short Circuit Transfer ⁽²⁾ 100% CO2 DC+ 9-12 (3/8-1/2) 2.5 (100) 18 80 0.7 (1.6)
0.035 in (0.9 mm) Short Circuit Transfer ⁽²⁾ 100% CO2 DC+ 9-12 (3/8-1/2) 3.8 (150) 19 120 1.1 (2.4)
0.035 in (0.9 mm) Short Circuit Transfer ⁽²⁾ 100% CO2 DC+ 9-12 (3/8-1/2) 6.4 (250) 22 175 1.8 (4.0)
0.035 in (0.9 mm) Spray Transfer 90% Ar / 10% CO2 DC+ 12-19 (1/2-3/4) 9.5 (375) 23 195 2.7 (6.0)
0.035 in (0.9 mm) Spray Transfer 90% Ar / 10% CO2 DC+ 12-19 (1/2-3/4) 12.7 (500) 29 230 3.6 (8.0)
0.035 in (0.9 mm) Spray Transfer 90% Ar / 10% CO2 DC+ 12-19 (1/2-3/4) 15.2 (600) 30 275 4.4 (9.6)
0.045 in (1.1 mm) Short Circuit Transfer ⁽²⁾ 100% CO2 DC+ 12-19 (1/2-3/4) 3.2 (125) 19 145 1.5 (3.4)
0.045 in (1.1 mm) Short Circuit Transfer ⁽²⁾ 100% CO2 DC+ 12-19 (1/2-3/4) 3.8 (150) 20 165 1.8 (4.0)
0.045 in (1.1 mm) Short Circuit Transfer ⁽²⁾ 100% CO2 DC+ 12-19 (1/2-3/4) 5.1 (200) 21 200 2.5 (5.4)
0.045 in (1.1 mm) Spray Transfer 90% Ar / 10% CO2 DC+ 12-19 (1/2-3/4) 8.9 (350) 27 285 4.2 (9.2)
0.045 in (1.1 mm) Spray Transfer 90% Ar / 10% CO2 DC+ 12-19 (1/2-3/4) 12.1 (475) 30 335 5.7 (12.5)
0.045 in (1.1 mm) Spray Transfer 90% Ar / 10% CO2 DC+ 12-19 (1/2-3/4) 12.7 (500) 30 340 6.0 (13.2)
0.052 in (1.3 mm) Spray Transfer 90% Ar / 10% CO2 DC+ 12-19 (1/2-3/4) 7.6 (300) 30 300 4.8 (10.7)
0.052 in (1.3 mm) Spray Transfer 90% Ar / 10% CO2 DC+ 12-19 (1/2-3/4) 8.1 (320) 30 320 5.2 (11.5)
0.052 in (1.3 mm) Spray Transfer 90% Ar / 10% CO2 DC+ 12-19 (1/2-3/4) 12.3 (485) 32 430 7.8 (17.1)
1/16 in (1.6 mm) Spray Transfer 90% Ar / 10% CO2 DC+ 12-25 (1/2-1) 5.3 (210) 27 325 4.8 (10.7)
1/16 in (1.6 mm) Spray Transfer 90% Ar / 10% CO2 DC+ 12-25 (1/2-1) 6.0 (235) 28 350 5.4 (12.0)
1/16 in (1.6 mm) Spray Transfer 90% Ar / 10% CO2 DC+ 12-25 (1/2-1) 7.4 (290) 29 430 6.7 (14.8)

NOTES

Note
⁽¹⁾ CTWD (Contact Tip to Work Distance). Subtract 1/4 in (6.4 mm) to calculate Electrical Stickout