Menu Close
SuperGlaze Aluminum Gem-Pak
Superglaze Gem-Pak
Superglaze Gem-Pak

Diameters / Packaging

Diameters
 (20) 1 lb Spool
 7 KG SPOOL (BS300)
 7.26 KG SPOOL (S300)
 16 lb Spool
 20 lb Spool
 300 lb Gem-Pak® Box
0.030 in (0.8 mm) ED030307
0.035 in (0.9 mm) ED030308 ED028395 ED036609
1.0 mm ED701753 ED702747
1.2 mm ED701754 ED702748
1.6 mm ED701755
1/16 in (1.6 mm) ED030281 ED036611
3/64 in (1.2 mm) ED030310 ED028397 ED029234 ED036610

SuperGlaze® 4043 MIG (GMAW) Wire

MIG (GMAW) | ED036609

AWS:
AWS A5.10 : ER4043

SuperGlaze® 4043 is commonly used to weld on 6XXX base materials and other heat treatable alloys

Diamètre

Sélectionnez le diamètre

  • 0.030 in (0.8 mm)
  • 0.035 in (0.9 mm)
  • 1/16 in (1.6 mm)
  • 1.0 mm
  • 1.2 mm
  • 1.6 mm
  • 3/64 in (1.2 mm)

Paquet

Sélectionnez un forfait

  • (20) 1 lb Spool
  • 16 lb Spool
  • 300 lb Gem-Pak® Box
Acheter maintenant

Détails

SuperGlaze® 4043 Aluminum Silicon alloy is very commonly used to weld on 6XXX base materials and other heat treatable alloys. SuperGlaze® 4043 is a soft alloy, with good crack resistance and high penetration compared to other filler metals. It can be used for certain brazing applications and to weld on high silicon casts like A356. Welding of 5XXX base materials with 4043 and other 4XXX filler metals should be avoided.

SuperGlaze® Gem-Pak®: TANGLE-FREE FEEDING. GUARANTEED.

The SuperGlaze® Gem-Pak® is 300 lbs. of premium aluminum weld wire under a layer of glass payoff gems. The patented design provides tangle-free feeding. Guaranteed.

Use Aluminum Gem-Pak® Payoff Kit (K5568-1) or Accu-Pak® Box Payoff Kit (K2175-2) for payoff

Traits

  • Designed for welding heat-treatable base alloys and more specifically the 6XXX series alloys
  • Lower melting point and more fluidity than the 5XXX series filler alloys
  • Low sensitivity to weld cracking with the 6XXX series base alloys
  • Gem-Pak®: layer of included glass gems guarantee tangle-free feeding
  • Gem-Pak®: simple patented design reduces rework and improves productivity
  • Gem-Pak®: fork-lift ready mini-pallet attached to the box - 100% recyclable

Disclaimers

Warning -

Cancer and Reproductive Harm -

www.P65Warnings.ca.gov

Des informations de service

Documentation (en anglais seulement)

Vous pourriez également avoir besoin

Image not found

Gem-Pak® Hood (23 in) Direct Pull Kit

K2860-1
Square Hood for Accu-Pak Boxes

Accu-Pak® Box Payoff Kit - 24 in

K2175-2
Cooper CRX 10iA/L Aluminum Welding Cobot Cart

Cooper™ CRX-10iA/L Aluminum Welding Cobot Cart

AD2489-14
Power Wave R450

Source d’alimentation robotisée Power Wave® R450

K3451-1

BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page

See test result disclaimer

CONFORMANCE

CONFORMANCES SPECIFICATION CLASSIFICATION
AWS AWS A5.10 ER4043

WIRE COMPOSITION

Classification %Be %Mg %Zn %Cu %Fe %Mn %Si %Ti
ER4043 Requirement 0.0003 max. 0.05 max. 0.10 max. 0.30 max. 0.8 max. 0.05 max. 4.5 - 6.0 0.20 max.
Typical Result 0.0000 0.01 0.00 0.03 0.1 0.00 5.1 0.02

TYPICAL OPERATING PROCEDURES

Diameter Shielding Gas Gas Flow
L/min (CFH) 		Polarity CTWD
mm (in.) 		Wire Feed Speed
m/min (in/min) 		Voltage
volts 		Approx. Current
amps
0.9 mm (.035") 100% Ar 14-24 (30-50) DC+ 12.7 (¹/₂) - 15.9 (⁵/₈) 14.9 (585) 23.3 170
1.2 mm (3/64") 100% Ar 14-24 (30-50) DC+ 12.7 (¹/₂) - 15.9 (⁵/₈) 8.9 (350) 25.2 195
1.6 mm (1/16") 100% Ar 14-24 (30-50) DC+ 12.7 (¹/₂) - 15.9 (⁵/₈) 6.4 (250) 24.0 240