Blue Max  308 LSi Precise Trak Reel

Diameters / Packaging

Diameters
25 lb (11.3 kg) Plastic Spool
25 lb Spool
33 lb (15 kg) Plastic Spool
250 lb (113 kg) Accu-Trak® Drum
500 lb (227 kg) Accu-Trak® Drum
1000 lb (454 kg) Precise-Trak™ Reel
0.030 in (0.8 mm) ED037252
0.035 in (0.9 mm) ED037250 ED035060 ED029768 ED032834
0.045 in (1.1 mm) ED019293 ED037251 ED035063 ED029769
1/16 in (1.6 mm) ED019294

Blue Max® 308LSi MIG (GMAW) Wire

MIG (GMAW) | ED032834

CLASSIFICATIONS:
AWS ER308Si
ER308LSi

BLUE MAX® MIG 308LSI is designed for use with 304 and 304L stainless steels base metals

DETAILS

BLUE MAX® MIG 308LSi has a higher silicon level than a standard 308L which gives increased puddle fluidity and toe wetting allowing for potentially high travel speeds

Features

  • Q2 Lot® - Certified Material Test Report showing actual wire composition, Country of Origin and calculated ferrite number (FN) of each lot is available online in the Certificate Center
  • Proprietary surface lubricant for steady feeding and arc stability leading to exceptional performance at high wire feed speeds
  • High silicon level for increased puddle fluidity and toe wetting
  • Versatile electrode designed to weld CrNi austenitic stainless steels
  • Used to primarily weld equipment made with 304 type stainless steel
  • Higher silicon content improves wetting of the weld metal and potentially higher travel speeds compared to standard 308L products

Disclaimers

Warning -

Cancer and Reproductive Harm -

www.P65Warnings.ca.gov

You May Also Need

BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page

See test result disclaimer

CONFORMANCE

CONFORMANCES SPECIFICATION CLASSIFICATION
AWS AWS A5.9 ER308LSi, ER308Si
ABS AWS A5.9 ER308LSi, ER308Si

MECHANICAL PROPERTIES

Classification Shielding Gas Yield Strength @ 0.2% Offset
MPa (ksi)
Tensile Strength
MPa (ksi)
Elongation
%
Charpy V-Notch
J (ft-lbs) @ -60°C (-76°F)
Typical Result 98% Ar, 2% O2 430 (63) 620 (90) 35 75 (55)

WIRE COMPOSITION

Classification %C %Cr %Cu %Mn %Mo %N %Nb %Ni %P %S %Si %Ti Ferrite Number (Delong ©) Ferrite Number (WRC-1992 ©)
ER308LSi Requirement 0.03 max. 19.5 - 22.0 0.75 max. 1.0 - 2.5 0.75 max. 9.0 - 11.0 0.03 max. 0.03 max. 0.65 - 1.00
ER308Si Requirement 0.08 max. 19.5 - 22.0 0.75 max. 1.0 - 2.5 0.75 max. 9.0 - 11.0 0.03 max. 0.03 max. 0.65 - 1.00
Typical Result 0.02 19.9-20.1 0.10 1.7-2.0 0.08 0.06 0.03 max. 9.6-10.7 0.03 0.01 0.75-0.93 0.01 12 11

TYPICAL OPERATING PROCEDURES

Diameter Transfer Mode Shielding Gas Polarity CTWD
mm (in.)⁽¹⁾
Wire Feed Speed
m/min (in/min)
Voltage
volts
Approx. Current
amps
Deposition Rate
kg/hr (lb/hr)
0.035 in (0.9 mm) Short Circuit Transfer 90% He / 7.5% Ar / 2.5% CO2 DC+ 13 (1/2) 3.0 (120) 19-20 55 0.9 (2.0)
0.035 in (0.9 mm) Short Circuit Transfer 90% He / 7.5% Ar / 2.5% CO2 DC+ 13 (1/2) 4.6 (180) 19-20 85 1.4 (3.0)
0.035 in (0.9 mm) Short Circuit Transfer 90% He / 7.5% Ar / 2.5% CO2 DC+ 13 (1/2) 5.8 (230) 20-21 105 1.8 (3.9)
0.035 in (0.9 mm) Short Circuit Transfer 90% He / 7.5% Ar / 2.5% CO2 DC+ 13 (1/2) 7.6 (300) 20-21 125 2.3 (5.0)
0.035 in (0.9 mm) Short Circuit Transfer 90% He / 7.5% Ar / 2.5% CO2 DC+ 13 (1/2) 8.9 (350) 21-22 140 2.7 (5.9)
0.035 in (0.9 mm) Short Circuit Transfer 90% He / 7.5% Ar / 2.5% CO2 DC+ 13 (1/2) 10.2 (400) 22-23 160 3.1 (6.7)
0.045 in (1.1 mm) Short Circuit Transfer 90% He / 7.5% Ar / 2.5% CO2 DC+ 13 (1/2) 2.5 (100) 19-20 100 1.1 (2.8)
0.045 in (1.1 mm) Short Circuit Transfer 90% He / 7.5% Ar / 2.5% CO2 DC+ 13 (1/2) 3.2 (125) 19-20 120 1.5 (3.5)
0.045 in (1.1 mm) Short Circuit Transfer 90% He / 7.5% Ar / 2.5% CO2 DC+ 13 (1/2) 3.8 (150) 21 135 1.7 (4.2)
0.045 in (1.1 mm) Short Circuit Transfer 90% He / 7.5% Ar / 2.5% CO2 DC+ 13 (1/2) 4.4 (175) 21 140 2.0 (4.8)
0.045 in (1.1 mm) Short Circuit Transfer 90% He / 7.5% Ar / 2.5% CO2 DC+ 13 (1/2) 5.6 (220) 22 170 2.6 (6.1)
0.045 in (1.1 mm) Short Circuit Transfer 90% He / 7.5% Ar / 2.5% CO2 DC+ 13 (1/2) 6.4 (250) 22-23 175 2.9 (6.9)
0.045 in (1.1 mm) Short Circuit Transfer 90% He / 7.5% Ar / 2.5% CO2 DC+ 13 (1/2) 7.0 (275) 22-23 185 3.2 (7.6)
0.035 in (0.9 mm) Axial Spray Transfer 98% Ar / 2% O2 DC+ 13 (1/2) 10.2 (400) 22 180 3.1 (6.7)
0.035 in (0.9 mm) Axial Spray Transfer 98% Ar / 2% O2 DC+ 13 (1/2) 10.8 (425) 23 190 3.3 (7.1)
0.035 in (0.9 mm) Axial Spray Transfer 98% Ar / 2% O2 DC+ 13 (1/2) 11.4 (450) 23 200 3.5 (7.5)
0.035 in (0.9 mm) Axial Spray Transfer 98% Ar / 2% O2 DC+ 13 (1/2) 12.1 (475) 23 210 3.7 (8.0)
0.045 in (1.1 mm) Axial Spray Transfer 98% Ar / 2% O2 DC+ 13 (1/2) 6.1 (240) 23 195 2.8 (6.6)
0.045 in (1.1 mm) Axial Spray Transfer 98% Ar / 2% O2 DC+ 13 (1/2) 6.6 (260) 24 230 3.0 (7.2)
0.045 in (1.1 mm) Axial Spray Transfer 98% Ar / 2% O2 DC+ 13 (1/2) 7.6 (300) 24 240 3.5 (8.3)
0.045 in (1.1 mm) Axial Spray Transfer 98% Ar / 2% O2 DC+ 13 (1/2) 8.3 (325) 25 250 3.8 (9.0)
0.045 in (1.1 mm) Axial Spray Transfer 98% Ar / 2% O2 DC+ 13 (1/2) 9.1 (360) 25 260 4.2 (10.0)
1/16 in (1.6 mm) Axial Spray Transfer 98% Ar / 2% O2 DC+ 19 (3/4) 4.4 (175) 25 260 4.3 (9.2)
1/16 in (1.6 mm) Axial Spray Transfer 98% Ar / 2% O2 DC+ 19 (3/4) 5.1 (200) 26 310 4.9 (10.5)
1/16 in (1.6 mm) Axial Spray Transfer 98% Ar / 2% O2 DC+ 19 (3/4) 6.4 (250) 26 330 6.2 (13.1)
1/16 in (1.6 mm) Axial Spray Transfer 98% Ar / 2% O2 DC+ 19 (3/4) 7.0 (275) 27 360 6.8 (14.4)
1/16 in (1.6 mm) Axial Spray Transfer 98% Ar / 2% O2 DC+ 19 (3/4) 7.6 (300) 28 390 7.4 (15.8)

NOTES

Note
⁽¹⁾ To estimate ESO, subtract 1/8 in (3.2 mm) from CTWD.