Menu Close
50 lb Can of Lincoln Electric Stick Electrodes

Diameters / Packaging

Diameters
 (3) 10 lb Easy Open Can
 (6) 1 lb Tube
 50 lb Easy Open Can
 50 lb Easy Open Can Buy America
1/4 x 18 in (6.4 x 450 mm) ED028918
1/8 x 14 in (3.2 x 350 mm) ED032589 ED031468 ED028281 ED033869
3/16 x 14 in (4.8 x 350 mm) ED028283 ED033871
3/32 x 14 in (2.4 x 350 mm) ED032588 ED032086 ED028280 ED033868
5/32 x 14 in (4.0 x 350 mm) ED032590 ED028282 ED033870
7/32 x 18 in (5.6 x 450 mm) ED028917 ED034307

Excalibur® 7018 MR® Stick (SMAW) Electrode

Stick (SMAW) | ED034307

CLASSIFICATIONS:
AWS A5.1 : E7018 H4R

Mild Steel, Low Hydrogen • AWS E7018 H4R

Diameter

Select Diameter

  • 1/4 x 18 in (6.4 x 450 mm)
  • 1/8 x 14 in (3.2 x 350 mm)
  • 3/16 x 14 in (4.8 x 350 mm)
  • 3/32 x 14 in (2.4 x 350 mm)
  • 5/32 x 14 in (4.0 x 350 mm)
  • 7/32 x 18 in (5.6 x 450 mm)

Package

Select Package

  • 50 lb Easy Open Can
  • 50 lb Easy Open Can Buy America

DETAILS

  • Improved coating integrity
  • Extreme bendability
  • 60% less moisture pickup vs. competition

Watch the Video

Features

  • Premium arc performance
  • Extreme bend ability
  • Excellent moisture resistance
  • Clean arc starts
  • Clear puddle and a smooth arc

Disclaimers

Warning -

Cancer and Reproductive Harm -

www.P65Warnings.ca.gov

Service Information

You May Also Need

50 lb Can of Lincoln Electric Stick Electrodes

Excalibur® 7018 MR® Stick (SMAW) Electrode

ED028280
50 lb Can of Lincoln Electric Stick Electrodes

Excalibur® 7018 MR® Stick (SMAW) Electrode

ED028282
Six 1 lb tubes of Excalibur 7018MR

Excalibur® 7018 MR® Stick (SMAW) Electrode

ED031468
Six 1 lb tubes of Excalibur 7018MR

Excalibur® 7018 MR® Stick (SMAW) Electrode

ED032086
View All

BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page

See test result disclaimer

CONFORMANCE

CONFORMANCES SPECIFICATION CLASSIFICATION
AWS AWS A5.1 E7018 H4R
ISO ISO 2560-B E4918 A H5
ABS ABS - Part 2 3YH5
BV BV - Chapter 5 3YHHH
CWB CSA W48 E4918
DNV-GL DNV - 2.9 3YH5
LR LR - Chapter 11 3YM H5

MECHANICAL PROPERTIES

Classification Yield Strength @ 0.2% Offset
MPa (ksi) 		Tensile Strength
MPa (ksi) 		Elongation
% 		Charpy V-Notch
J (ft-lbs) @ -30°C (-20°F) 		Hardness Rockwell B
E7018 H4R Requirement 400 (58) min. 480 (70) min. 22 min. 27 (20) min.
Typical Result, As-welded 420-510 (60-74) 510-600 (74-87) 24-36 27-413 (20-304) 82-91

DEPOSIT COMPOSITION

Classification %C %Cr %Mn %Mo %Ni %P %S %Si %V %Mn+Ni+Cr+Mo+V Diffusible Hydrogen
mL/100g Weld Metal 		1800F H2O - As received 1800F H2O - After 9 hrs at 80F/80%RH
E7018 H4R Requirement 0.15 max. 0.20 max. 1.60 max. 0.30 max. 0.30 max. 0.035 max. 0.035 max. 0.75 max. 0.08 max. 1.75 max. 4 max. 0.3 max. 0.4 max.
Typical Result 0.04-0.07 0.02-0.06 1.08-1.51 0.04 max. 0.01-0.05 0.009-0.016 0.004-0.011 0.41-0.66 0.01 max. 1.15-1.59 1-4 0.1 max. 0.2-0.4

TYPICAL OPERATING PROCEDURES

Diameter Polarity⁽¹⁾ Current
Amps
3/32 in (2.4 mm) DC+ 70-110
3/32 in (2.4 mm) AC 80-120
1/8 in (3.2 mm) DC+ 90-160
1/8 in (3.2 mm) AC 100-160
5/32 in (4.0 mm) DC+ 130-210
5/32 in (4.0 mm) AC 140-210
3/16 in (4.8 mm) DC+ 180-300
3/16 in (4.8 mm) AC 200-300
7/32 in (5.6 mm) DC+ 250-330
7/32 in (5.6 mm) AC 270-370
1/4 in (6.4 mm) DC+ 300-400
1/4 in (6.4 mm) AC 325-420

NOTES

Note
⁽¹⁾ Preferred polarity is listed first.
Extreme bendability applies to 3/32, 1/8, and 5/32 in. diameters.