DETAILS
Designed to produce a nickel bearing weld deposit with impact properties capable of exceeding 27 J (20 ft·lbf) at -29°C (-20°F). It handles poor fit-up in the vertical up position and welds gaps up to 9.5 mm (3/8 in).
Features
- Designed to produce a nickel bearing weld deposit
- Capable of producing weld deposits with impact toughness exceeding 27 J (20 ft·lbf) at -29°C (-20°F)
- Color match on weathering steels
- Handles poor fit-up
- Root bead capability
Disclaimers
Service Information
You May Also Need
BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page
See test result disclaimer
CONFORMANCE
| CONFORMANCES | SPECIFICATION | CLASSIFICATION |
|---|---|---|
| AWS | AWS A5.29 | E71T8-Ni1-H8 |
| ABS | ABS - Part 2 | 3YSA |
| CWB | CSA W48 | E491T8-A3-Ni1-H16 (E491T8-Ni1-H16) |
| DNV-GL | DNV - 2.9 | III YMS H10 |
| DB | ISO 17632-A | T 42 3 1Ni Y N 1 H10 |
| LR | LR - Chapter 11 | 3YS H15 |
MECHANICAL PROPERTIES
| Classification | Polarity |
Yield Strength @ 0.2% Offset
MPa (ksi) |
Tensile Strength
MPa (ksi) |
Elongation
% |
Charpy V-Notch
J (ft-lbs) @ -30°C (-20°F) |
Charpy V-Notch
J (ft-lbs) @ -40°C (-40°F) |
|---|---|---|---|---|---|---|
| E71T8-Ni1-H8 Requirement | DC- | 400 (58) min. | 480-620 (70-90) | 20 min. | 27 (20) min. | |
| Typical Result, As-welded | DC- | 400 (58) | 510-580 (74-84) | 22 | 120-218 (89-161) | 72-110 (53-81) |
DEPOSIT COMPOSITION
| Classification | Polarity | %Al | %B | %C | %Cr | %Mn | %Mo | %Ni | %P | %S | %Si | %V |
Diffusible Hydrogen
mL/100g Weld Metal |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Typical Result | DC- | 0.7-1.0 | 0.0014 | 0.06-0.10 | 0.02-0.04 | 1.08-1.23 | 0.01 | 0.86-1.00 | 0.010 | 0.004 | 0.25-0.29 | 0.01 | 3.9 |
TYPICAL OPERATING PROCEDURES
| Diameter | Polarity |
CTWD
mm (in.) |
Wire Feed Speed
m/min (in/min) |
Voltage
volts |
Approx. Current
amps |
Melt-off Rate
kg/hr (lb/hr) |
Deposition Rate
kg/hr (lb/hr) |
Efficiency
% |
|---|---|---|---|---|---|---|---|---|
| 5/64 in (2.0 mm) | DC- | 25 (1) | 1.3 (50) | 16-17 | 145 | 1.4 (3.0) | 1.0 (2.3) | 76 |
| 5/64 in (2.0 mm) | DC- | 25 (1) | 1.8 (70) | 18-19 | 195 | 2.0 (4.3) | 1.5 (3.3) | 76 |
| 5/64 in (2.0 mm) | DC- | 25 (1) | 2.3 (90) | 19-20 | 240 | 2.5 (5.5) | 2.0 (4.3) | 78 |
| 5/64 in (2.0 mm) | DC- | 25 (1) | 2.8 (110) | 20-21 | 275 | 3.0 (6.7) | 2.4 (5.3) | 79 |
| 5/64 in (2.0 mm) | DC- | 25 (1) | 3.0 (120) | 21-22 | 290 | 3.3 (7.3) | 2.6 (5.8) | 79 |
| 5/64 in (2.0 mm) | DC- | 25 (1) | 3.5 (140) | 22-23 | 310 | 3.9 (8.5) | 3.0 (6.9) | 81 |