Menu Close
Stem package of Lincolnweld submerged arc wire

Diameters / Packaging

Diameters
 60 lb Coil
 1000 lb Speed Feed® Drum
 1000 lb Speed Feed® Reel
 2200 lb Speed Feed® Stem
1/8 in (3.2 mm) ED011671 ED030426 ED032998
3/32 in (2.4 mm) ED011674 ED030425
5/32 in (4.0 mm) ED028264 ED032999
5/64 in (2.0 mm) ED011678 EDS01631

Lincolnweld® L-56®

Submerged Arc Welding (SAW) | ED032999

CLASSIFICATIONS:
EH11K

Mild Steel Solid Electrode

Diameter

Select Diameter

  • 1/8 in (3.2 mm)
  • 3/32 in (2.4 mm)
  • 5/32 in (4.0 mm)
  • 5/64 in (2.0 mm)

Package

Select Package

  • 1000 lb Speed Feed® Drum
  • 2200 lb Speed Feed® Stem
Buy Now

DETAILS

  • A low carbon, high manganese, very high silicon wire
  • Can be used with Lincolnweld® 800 series fluxes for welds requiring 480 MPa (70 ksi) tensile strength in stress relieved conditions

Features

  • A low carbon, high manganese, very high silicon wire
  • Can be used with Lincolnweld® 800 series fluxes for welds requiring 480 MPa (70 ksi) tensile strength in stress relieved conditions
  • Actual (Type 3.1) certificates for each lot of wire showing chemical composition are available in the certificate center of lincolnelectric.com

Disclaimers

Warning -

Cancer and Reproductive Harm -

www.P65Warnings.ca.gov

Service Information

Documentation

You May Also Need

NA-5 Control

NA-5 Control

K356-2
NA-4 Control Box

NA-4 Controller

K388-2
LT-7 Tractor

LT-7 Tractor (Track Model)

K395-1
500 lb Accu-Trak Drum, 600 lb Accu- Trak Drum, 1000 Accu-Pak Drum

Lincolnweld® L-56®

ED028264
View All

BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page

See test result disclaimer

CONFORMANCE

CONFORMANCES SPECIFICATION CLASSIFICATION
AWS AWS A5.17 EH11K
AWS AWS A5.23 EH11K
ISO ISO 14171-B SU31
MIL MIL-E-23765/1D MIL-70S-6
MIL MIL-E-23765/1E MIL-70S-6

WIRE COMPOSITION

Classification %C %Mn %P %S %Si %Total Cu
EH11K Requirement 0.06 - 0.15 1.40 - 1.85 0.030 max. 0.030 max. 0.80 - 1.15 0.35 max.
SU31 Requirement 0.06 - 0.15 1.40 - 1.85 0.030 max. 0.030 max. 0.80 - 1.15 0.40 max.
Typical Result 0.10 1.65 0.014 0.000 0.85 0.10