Menu Close
500 lb Accu-Trak Drum, 600 lb Accu- Trak Drum, 1000 Accu-Pak Drum

Diameters / Packaging

Diameters
 60 lb Coil
 600 lb Speed Feed® Drum
 1000 lb Speed Feed® Drum
1/8 in (3.2 mm) ED011743 EDS11741 ED011742
3/16 in (4.8 mm) ED011749 ED011748
3/32 in (2.4 mm) ED011752 ED011751
5/32 in (4.0 mm) ED011758 ED011757
5/64 in (2.0 mm) ED011762 ED011761

Lincolnweld® L-60

Submerged Arc Welding (SAW) | ED011742

CLASSIFICATIONS:
EL12

Mild Steel Solid Electrode

Diameter

Select Diameter

  • 1/8 in (3.2 mm)
  • 3/16 in (4.8 mm)
  • 3/32 in (2.4 mm)
  • 5/32 in (4.0 mm)
  • 5/64 in (2.0 mm)

Package

Select Package

  • 60 lb Coil
  • 600 lb Speed Feed® Drum
  • 1000 lb Speed Feed® Drum
Buy Now

DETAILS

  • A low carbon, low manganese, low silicon general purpose electrode
  • Provides the lowest hardness and is best suited for use with the Lincolnweld® 700 series of active fluxes

Features

  • A low carbon, low manganese, low silicon general purpose electrode
  • Provides the lowest hardness and is best suited for use with the Lincolnweld® 700 series of active fluxes
  • Actual (Type 3.1) certificates for each lot of wire showing chemical composition are available in the certificate center of lincolnelectric.com

Disclaimers

Warning -

Cancer and Reproductive Harm -

www.P65Warnings.ca.gov

Service Information

Documentation

You May Also Need

NA-5 Control

NA-5 Control

K356-2
NA-4 Control Box

NA-4 Controller

K388-2
LT-7 Tractor

LT-7 Tractor (Track Model)

K395-1
500 lb Accu-Trak Drum, 600 lb Accu- Trak Drum, 1000 Accu-Pak Drum

Lincolnweld® L-60

ED011748
View All

BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page

See test result disclaimer

CONFORMANCE

CONFORMANCES SPECIFICATION CLASSIFICATION
AWS AWS A5.17 EL12
AWS AWS A5.23 EL12
ISO ISO 14171-A S1
DB ISO 14171-S S1
MIL MIL-E-23765/4 MIL-EL12

WIRE COMPOSITION

Classification %C %Mn %P %S %Si %Total Cu
EL12 Requirement 0.04 - 0.14 0.25 - 0.60 0.030 max. 0.030 max. 0.10 max. 0.35 max.
S1 Requirement 0.05 - 0.15 0.35 - 0.60 0.025 max. 0.025 max. 0.15 max.
Typical Result 0.11 0.48 0.005 0.009 0.07 0.12