Hardfacing Consumables Family Group

Diameters / Packaging

Diameters
50lb Coil
600lb Speed-Feed® Drum
1/8 ED018590 ED018593
5/32 ED018594

Lincore® 410NiMo

Metal-Cored Submerged Arc (SAW)

Low Alloy steels designed for rebuilding of carbon or low alloy parts, Metal-to-Metal high impact.

DETAILS

Low Alloy steels designed for rebuilding of carbon or low alloy parts used in applications involving non-lubricated rolling or sliding Metal-to-Metal wear. This product is for high impact applications.

Features

  • Metal-cored wire with low carbon deposit, which forms softer, tougher martensite than other roll alloys
  • Works well with Lincolnweld® 801 Flux or Lincolnweld®802 Flux

Typical Applications

  • Metal to Metal wear rebuilding/repairing occuring by rolling, sliding, impacting
  • Castor Roll

Welding Positions

  • Flat/Horizontal

Disclaimers

Warning -

Cancer and Reproductive Harm -

www.P65Warnings.ca.gov

You May Also Need

BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page

See test result disclaimer

MECHANICAL PROPERTIES

Flux Classification Hardness Rockwell C
Lincolnweld® 801® Typical Result 32-40

DEPOSIT COMPOSITION

Flux Classification %C %Cr %Mn %Mo %Ni %Si
Lincolnweld® 801® Typical Result 0.05 13.0 0.8 1.0 2.0 0.5

TYPICAL OPERATING PROCEDURES

Diameter Polarity Wire Feed Speed
m/min (in/min)
Voltage
volts
Approx. Current
amps
3/32 in (2.4 mm) DC+ 1.7 (65) 24 250
3/32 in (2.4 mm) DC+ 3.0 (120) 28 325
3/32 in (2.4 mm) DC+ 4.4 (175) 31 425
1/8 in (3.2 mm) DC+ 1.5 (60) 26 325
1/8 in (3.2 mm) DC+ 3.6 (140) 30 575
5/32 in (4.0 mm) DC+ 1.4 (55) 27 440
5/32 in (4.0 mm) DC+ 2.2 (85) 30 575
5/32 in (4.0 mm) DC+ 2.9 (115) 32 700