DETAILS
Lincore® 410NiMo Metal-Cored Submerged Arc Wire recommended to be used with primary 802 and secondary 860 standard flux are not sized for semiautomatic applications; however, they can be ordered in special sizing by contacting your Lincoln Electric representative. Composition and properties depend upon dilution. Single layer deposit properties depend upon base metal and/or build-up material.
Features
- Metal-cored wire with low carbon deposit, which forms softer, tougher martensitic than other roll alloys
- Works well with Lincolnweld® 801 Flux or Lincolnweld®802 Flux
Disclaimers
Service Information
You May Also Need
BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page
See test result disclaimer
MECHANICAL PROPERTIES
Flux | Classification | Hardness Rockwell C |
---|---|---|
Lincolnweld® 801® | Typical Result | 32-40 |
DEPOSIT COMPOSITION
Flux | Classification | %C | %Cr | %Mn | %Mo | %Ni | %Si |
---|---|---|---|---|---|---|---|
Lincolnweld® 801® | Typical Result | 0.05 | 13.0 | 0.8 | 1.0 | 2.0 | 0.5 |
TYPICAL OPERATING PROCEDURES
Diameter | Polarity |
Wire Feed Speed
m/min (in/min) |
Voltage
volts |
Approx. Current
amps |
---|---|---|---|---|
3/32 in (2.4 mm) | DC+ | 1.7 (65) | 24 | 250 |
3/32 in (2.4 mm) | DC+ | 3.0 (120) | 28 | 325 |
3/32 in (2.4 mm) | DC+ | 4.4 (175) | 31 | 425 |
1/8 in (3.2 mm) | DC+ | 1.5 (60) | 26 | 325 |
1/8 in (3.2 mm) | DC+ | 3.6 (140) | 30 | 575 |
5/32 in (4.0 mm) | DC+ | 1.4 (55) | 27 | 440 |
5/32 in (4.0 mm) | DC+ | 2.2 (85) | 30 | 575 |
5/32 in (4.0 mm) | DC+ | 2.9 (115) | 32 | 700 |