Hardfacing Consumables Family Group

Diameters / Packaging

Diameters
50lb Coil
600lb Speed-Feed® Drum
1/8 ED015262 ED015268
3/32 ED015260 ED015261

Lincore® 420

Metal-Cored Submerged Arc (SAW)

Low Alloy steels designed for rebuilding of carbon or low alloy parts used in applications involving non-lubricated rolling or sliding metal-to-metal wear.

DETAILS

Low Alloy steels designed for rebuilding of carbon or low alloy parts used in applications involving non-lubricated rolling or sliding metal-to-metal wear.

Features

  • Metal-cored wire that is most widely used for caster roll rebuilding
  • Works well with Lincolnweld® 801 or Lincolnweld® 802 Flux
  • Best in class castor roll rebuilding

Typical Applications

  • Caster rolls

Welding Positions

  • Flat/Horizontal

Disclaimers

Warning -

Cancer and Reproductive Harm -

www.P65Warnings.ca.gov

You May Also Need

BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page

See test result disclaimer

MECHANICAL PROPERTIES

Flux Classification Hardness Rockwell C
Lincolnweld® 801® Typical Result 46-50

DEPOSIT COMPOSITION

Flux Classification %C %Cr %Mn %Si
Lincolnweld® 801® Typical Result 0.20 12.0 1.2 0.5

TYPICAL OPERATING PROCEDURES

Diameter Polarity Wire Feed Speed
m/min (in/min)
Voltage
volts
Approx. Current
amps
3/32 in (2.4 mm) DC+ 1.7 (65) 24 250
3/32 in (2.4 mm) DC+ 3.0 (120) 28 375
3/32 in (2.4 mm) DC+ 4.4 (175) 31 450
1/8 in (3.2 mm) DC+ 1.5 (60) 26 350
1/8 in (3.2 mm) DC+ 2.5 (100) 28 500
1/8 in (3.2 mm) DC+ 3.6 (140) 30 625
5/32 in (4.0 mm) DC+ 1.4 (55) 27 475
5/32 in (4.0 mm) DC+ 2.2 (85) 30 650
5/32 in (4.0 mm) DC+ 2.9 (115) 32 800