Menu Close
500 lb Accu-Trak Drum, 600 lb Accu- Trak Drum, 1000 Accu-Pak Drum

Diameters / Packaging

Diameters
 50 lb (22.7 kg) Coil
 600 lb (272 kg) Speed-Feed® Drum
1/8 in (3.2 mm) ED020788 ED020791

Lincore® 8620 Metal-Cored Submerged Arc (SAW) Wire

Metal-Cored Submerged Arc (SAW) | ED020791

Lincore® 8620 Metal-Cored Submerged Arc Wire for general build-up, Used on mining components such as cable drums, sheaves, gears and shafts (Roll Rebuilding, Build Up)

Diameter

Select Diameter

  • 1/8 in (3.2 mm)

Package

Select Package

  • 50 lb (22.7 kg) Coil
  • 600 lb (272 kg) Speed-Feed® Drum
Buy Now

DETAILS

Lincore® 8620 Metal-Cored Submerged Arc Wire, can be flame hardened to 38 Rockwell C (RC) Recommended to be used with primary 801, secondary 802 and 880 standard flux. Composition and properties depend upon dilution. Single layer deposit properties depend upon base metal and/or build-up material.

Features

  • Metal-cored wire for build-up on worn rolls
  • A little softer than Lincore® 20 for easier machining
  • Used on rolls and backup rolls when water spray causes pitting on tool steel deposits

Disclaimers

Warning -

Cancer and Reproductive Harm -

www.P65Warnings.ca.gov

Service Information

You May Also Need

SHADOW SPLIT LEATHER-SLEEVED JACKET

Shadow Split Leather Sleeved Welding Jacket - XLarge

K2986-XL

BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page

See test result disclaimer

MECHANICAL PROPERTIES

Flux Classification Hardness Rockwell C
Lincolnweld® 801® Typical Result 16-20

DEPOSIT COMPOSITION

Flux Classification %C %Cr %Mn %Mo %Ni %Si
Lincolnweld® 801® Typical Result 0.09 0.45 0.80 0.15 0.55 0.30

TYPICAL OPERATING PROCEDURES

Diameter Polarity Wire Feed Speed
m/min (in/min) 		Voltage
volts 		Approx. Current
amps
1/8 in (3.2 mm) DC+ 1.5 (60) 26 400
1/8 in (3.2 mm) DC+ 2.5 (100) 28 550
1/8 in (3.2 mm) DC+ 3.6 (140) 30 680