Lincore Submerged Arc Cored Wire

Diameters / Packaging

Diameters
50 lb (22.7kg) Coil
600 lb (272 kg) Speed-Feed® Drum
1/8 in (3.2 mm) ED037313 ED037312
3/32 in (2.4 mm) ED037315 ED037314

Lincore® 420HC-S Metal-Cored Submerged arc (SAW) Electrode

Metal-Cored Submerged Arc (SAW) | ED037313

LINCORE® 420HC-S Metal-Cored Submerged Arc Wire designed for caster rolls and backup rolls applications when water spray causes pitting on tool steel deposits (Metal to Metal)

DETAILS

LINCORE® 420HC-S produces a high carbon 420 stainless steel deposit where a higher hardness is required, to be used with recommended Lincoln weld® 801®, Lincoln weld® 802™ standard fluxes for semiautomatic operations.

Features

  • Metal-cored wire which produces a high carbon 420 stainless steel deposit
  • Used on rolls and backup rolls when water spray causes pitting on tool steel deposits

Disclaimers

Warning -

Cancer and Reproductive Harm -

www.P65Warnings.ca.gov

You May Also Need

BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page

See test result disclaimer

MECHANICAL PROPERTIES

Flux Classification Hardness Rockwell C
Lincolnweld® 801® Typical Result 53

DEPOSIT COMPOSITION

Flux Classification %C %Cr %Mn %Si
Lincolnweld® 801® Typical Result 0.26 12.0 1.1 0.4

TYPICAL OPERATING PROCEDURES

Diameter Polarity CTWD
mm (in.)
Wire Feed Speed
m/min (in/min)
Voltage
volts
Approx. Current
amps
1/8" (3.2 mm) DC+ 41 (1⁵/₈) 2.7 (105) 28 540