Hardfacing Consumables Family Group

Diameters / Packaging

Diameters
600lb Speed-Feed® Drum
1/8 ED018551

Lincore® 423L

Metal-Cored Submerged Arc (SAW)

Low Alloy steels designed for rebuilding of carbon or low alloy parts used in Metal-to-Metal wear applications, works best in non-lubricated rolling or sliding

DETAILS

Ideal for building up on carbon and low alloy steels. Use as an underbase for carbon steel parts prior to hardfacing. Great compressive strength under heavy loading. Deposits are generally crack free, machinable and can be flame cut. Deposit thickness is unlimited. Used in Metal-to-Metal wear applications, works best in non-lubricated rolling or sliding.

Features

  • Metal-cored wire, provides a softer “as-welded” deposit than Lincore® 420
  • More resistance to softening during tempering above 482°C (900°F)
  • Works well with Lincolnweld® 802
  • Designed for rebuilding parts used in applications involving non-lubricated rolling or sliding.

Typical Applications

  • Brake, Crane, Drive
  • Drum, Extrusion, Kiln
  • Mine Car, Power Generation, Rail
  • Roll, Shovel, Tractor, Wheel

Welding Positions

  • Flat/Horizontal

Disclaimers

Warning -

Cancer and Reproductive Harm -

www.P65Warnings.ca.gov

You May Also Need

BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page

See test result disclaimer

MECHANICAL PROPERTIES

Flux Classification Hardness Rockwell C
Lincolnweld® 802® Typical Result 41-47

DEPOSIT COMPOSITION

Flux Classification %C %Cr %Mn %Mo %Ni %Si %V
Lincolnweld® 802® Typical Result 0.15 11.5 1.2 1.0 2.0 0.4 0.15

TYPICAL OPERATING PROCEDURES

Diameter Polarity Wire Feed Speed
m/min (in/min)
Voltage
volts
Approx. Current
amps
1/8 in (3.2 mm) DC+ 1.5 (60) 26 350
1/8 in (3.2 mm) DC+ 2.5 (100) 28 500
1/8 in (3.2 mm) DC+ 3.6 (140) 30 610