50 lb Can of Lincoln Electric Stick Electrodes

Diameters / Packaging

Diameters
50 lb Easy Open Can
1/8 x 14 in (3.2 x 350 mm) ED037582
3/16 x 14 in (4.8 x 350 mm) ED034458
4.0 x 350 mm (5/32 x 14 in) ED034456
5.0 x 350 mm (3/16 x 14 in) ED034457

Pipeliner® Arc 80

Stick (SMAW) | ED034456

CLASSIFICATIONS:
E8010-G
E8010-P1

Low Alloy, Cellulosic, Pipe • AWS E8010-P1

DETAILS

Designed for vertical down welding of cross-country and in-plant pipe.

Features

  • Q2 Lot® Control and Tested – Lot Certificate available online.
  • Excellent impact properties without the intentional addition of Boron
  • Clean, visible weld puddle
  • Superior puddle control

Disclaimers

Warning -

Cancer and Reproductive Harm -

www.P65Warnings.ca.gov

BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page

See test result disclaimer

CONFORMANCE

CONFORMANCES SPECIFICATION CLASSIFICATION
AWS AWS A5.5 E8010-G, E8010-P1
CWB CSA W48 E5510-P1

MECHANICAL PROPERTIES

Classification Yield Strength @ 0.2% Offset
MPa (ksi)
Tensile Strength
MPa (ksi)
Elongation
%
Charpy V-Notch
J (ft-lbs) @ -30°C (-20°F)
Charpy V-Notch
J (ft-lbs) @ -45°C (-50°F)
Hardness Rockwell B
E8010-P1 Requirement 460 (67) min. 550 (80) min. 19 min. 27 (20) min.
Typical Result, As-welded 460-540 (67-78) 550-650 (80-94) 19-29 51-114 (38-84) 34-93 (25-69) 86-98

DEPOSIT COMPOSITION

Classification %B %C %Cr %Mn %Mo %Ni %P %S %Si %V
E8010-P1 Requirement 0.20 max. 0.30 max. 1.20 max. 0.50 max. 1.00 max. 0.03 max. 0.03 max. 0.60 max. 0.10 max.
Typical Result 0.0002 max. 0.12-0.20 0.01-0.05 0.59-0.97 0.09-0.20 0.60-1.00 0.01 max. 0.01 0.09-0.23 0.01

TYPICAL OPERATING PROCEDURES

Classification⁽²⁾ Polarity⁽¹⁾ Current
Amps
4.0 mm (5/32 in) DC+ 100-165
3/16 in DC+ 125-205
5.0 mm DC+ 130-210

NOTES

Note
⁽¹⁾ Preferred polarity is listed first.
⁽²⁾ Size 3/16 in. is manufactured to US standard units