DETAILS
Alloy 5356 TIG is used when 40,000 PSI is not a requirement. Suitable for all position non- heat treatable welding applications and recommended for welding 5XXX or 6XXX cast and wrought aluminum alloys.
Features
- Excellent for color matching after anodizing
- General purpose filler alloy for 5XXX and 6XXX series alloys
- Most widely used aluminum-magnesium welding alloy
- High strength filler metal
- Alloy embossed on each rod for easy identification
Disclaimers
Service Information
You May Also Need
BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page
See test result disclaimer
CONFORMANCE
| CONFORMANCES | SPECIFICATION | CLASSIFICATION |
|---|---|---|
| AWS | AWS A5.10 | ER5356 |
WIRE COMPOSITION
| Classification | %Be | %Cr | %Cu | %Fe | %Mg | %Mn | %Si | %Ti | %Zn |
|---|---|---|---|---|---|---|---|---|---|
| ER5356 Requirement | 0.0003 max. | 0.05 - 0.20 | 0.10 max. | 0.40 max. | 4.5 - 5.5 | 0.05 - 0.20 | 0.25 max. | 0.06 - 0.20 | 0.10 max. |
| Typical Result | 0.0002 max. | 0.12 | 0.00 | 0.11 | 4.9 | 0.12 | 0.06 | 0.10 | 0.01 |