Diameters / Packaging
|
Diameters |
10 lb (4.5 kg) Plastic Tube |
|---|---|
| 1/8 in (3.2 mm) | TG413125638 |
| 1/16 in (1.6 mm) | TG413062638 |
| 3/32 in (2.4 mm) | TG413093638 |
DETAILS
TECHALLOY® 413 is designed for MIG and TIG of 70/30, 80/20 and 90/10 copper-nickel alloys, preheating is generally not required for this product.
Features
- This filler metal can be used for MIG overlay on steel after a first layer with Nickel 211
- Preheating is generally not required for this product
- Q2 Lot® -Certificate showing actual wire composition available online
- Q2 Lot® - Certificate showing actual wire composition available online
Disclaimers
Service Information
BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page
See test result disclaimer
CONFORMANCE
| CONFORMANCES | SPECIFICATION | CLASSIFICATION |
|---|---|---|
| AWS | AWS A5.7 | ERCuNi |
| ABS | AWS A5.7 | ERCuNi |
| CWB | AWS A5.7 | ERCuNi |
| MIL | MIL-E-21562E | RN67 |
WIRE COMPOSITION
| Classification | %Fe | %Mn | %P | %Pb | %S | %Si | %Ti | %Cu+Ag | %Ni+Co |
|---|---|---|---|---|---|---|---|---|---|
| ERCuNi Requirement | 0.40 - 0.75 | 1.0 max. | 0.02 max. | 0.02 max. | 0.01 max. | 0.25 max. | 0.20 - 0.50 | Remainder | 29.0 - 32.0 |
| Typical Result | 0.55 | 0.6 | 0.00 | 0.00 | 0.00 | 0.03 | 0.34 | 68 | 30.0 |