Diameters / Packaging

Diameters	33 lb (15 kg) Steel Spool	250 lb Accu-Trak® Drum	300 lb Speed Feed® Reel
0.035 in (0.9 mm)	MG625035667
0.045 in (1.1 mm)	MG625045667	MG625045684
1/16 in (1.6 mm)	MG625062667		MG625062693

Techalloy® 625 MIG (GMAW) Wire

MIG (GMAW) | MG625062667

CLASSIFICATIONS:
AWS ERNiCrMo-3

DETAILS

TECHALLOY® 625 is designed to match the composition and properties of alloy 625 Ni-Cr-Mo alloy system provides excellent resistance to oxidizing and reducing environments, the high molybdenum content provides good stress, pitting and crevice corrosion resistance.

Features

Designed to match the composition and properties of Alloy 627
The Ni-Cr-Mo alloy system provides excellent resistance to oxidizing and reducing environments
The high molybdenum content provides good stress, pitting and crevice corrosion resistance
Most popular nickel alloy for cladding
Provides high temperature strength and structural stability
Q2 Lot® - Certificate showing actual wire composition available online

Disclaimers

Warning -

Cancer and Reproductive Harm -

www.P65Warnings.ca.gov

Service Information

Documentation

Product Brief

BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page

See test result disclaimer

CONFORMANCE

CONFORMANCES	SPECIFICATION	CLASSIFICATION
AWS	AWS A5.14	ERNiCrMo-3
CWB	AWS A5.14	ERNiCrMo-3
MIL	MIL-E-21562E	EN625

WIRE COMPOSITION

Classification	%Al	%C	%Cr	%Cu	%Fe	%Mn	%Mo	%P	%S	%Si	%Ti	%Nb+Ta	%Ni+Co
ERNiCrMo-3 Requirement	0.40 max.	0.10 max.	20.0 - 23.0	0.50 max.	5.0 max.	0.50 max.	8.0 - 10.0	0.02 max.	0.015 max.	0.50 max.	0.40 max.	3.15 - 4.15	58.0 min.
Typical Result	0.10	0.01	22.2	0.01	0.3	0.01	8.8	0.003 max.	0.003 max.	0.06	0.21	3.47	64.8

TYPICAL OPERATING PROCEDURES

Diameter	Shielding Gas	Polarity	Voltage volts	Approx. Current amps
.035" (0.9 mm)	75% Ar, 25% He	DC+	26-29	160-190
.045" (1.1 mm)	75% Ar, 25% He	DC+	28-32	180-220
1/16" (1.6 mm)	75% Ar, 25% He	DC+	29-33	200-250