Diameters / Packaging
|
Diameters |
10 lb (4.5 kg) Easy Open Can |
|---|---|
| 1/8 x 14 in (3.2 x 355 mm) | EL112LFE125634 |
| 3/16 x 14 in (4.8 x 355 mm) | EL112LFE187634 |
| 5/32 x 14 in (4.0 x 355 mm) | EL112LFE156634 |
DETAILS
TECH-ROD® 112LFe product is designed to have less than 1% Iron (Fe) for overlay applications where low iron is required, typically achieves Fe levels of 1% or less in the weld deposit.
Features
- A low iron version of the standard Tech-Rod® 112 covered electrode which is used to weld nickel-chromium-molybdenum alloys
- The product is designed to have less than 1% Iron (Fe) for overlay applications where low iron is required
- Product typically achieves Fe levels of 1% or less in a weld deposit
- Q2 Lot® - certificates showing actual deposit composition available online
Disclaimers
Service Information
BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page
See test result disclaimer
CONFORMANCE
| CONFORMANCES | SPECIFICATION | CLASSIFICATION |
|---|---|---|
| AWS | AWS A5.11 | ENiCrMo-3 |
MECHANICAL PROPERTIES
| Classification |
Tensile Strength
MPa (ksi) |
Elongation
% |
|---|---|---|
| ENiCrMo-3 Requirement | 760 (110) min. | 30 min. |
| Typical Result, As-welded | 770 (112) | 43 |
DEPOSIT COMPOSITION
| Classification | %C | %Cr | %Cu | %Fe | %Mn | %Mo | %P | %S | %Si | %Nb+Ta | %Ni+Co |
|---|---|---|---|---|---|---|---|---|---|---|---|
| ENiCrMo-3 Requirement | 0.10 max. | 20.0 - 23.0 | 0.50 max. | 7.0 max. | 1.0 max. | 8.0 - 10.0 | 0.03 max. | 0.02 max. | 0.75 max. | 3.15 - 4.15 | 55.0 min. |
| Typical Result | 0.04 | 22.6 | 0.00 | 0.8 | 0.5 | 8.7 | 0.01 | 0.00 | 0.30 | 3.76 | 62.8 |
TYPICAL OPERATING PROCEDURES
| Diameter |
Current
Amps |
|---|---|
| 1/8" (3.2 mm) | 80-110 |
| 5/32" (4.0 mm) | 110-140 |
| 3/16" (4.8 mm) | 110-160 |