DETAILS
Smooth arc transfer, low spatter and good bead appearance make this a top quality electrode. Operators will enjoy the well directed arc with small ball transfer.
Features
- Smooth arc transfer and low spatter
- Designed for welding with either 100% CO2 or 75-82% Argon/balance CO2 shielding gases
- Good bead appearance
- Fast freezing slag for out-of-position welding
- Meets AWS D1.8 seismic lot waiver requirements
- Notes: AWS D1.8 structural steel seismic supplement test data can be found at the Lincoln Electric Certificate Center.
Disclaimers
Service Information
You May Also Need
BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page
See test result disclaimer
CONFORMANCE
| CONFORMANCES | SPECIFICATION | CLASSIFICATION |
|---|---|---|
| AWS | AWS A5.20 | E71T-1C-H8, E71T-1M-H8, E71T-9C-H8, E71T-9M-H8 |
| AWS | AWS A5.36 | E71T1-C1A2-CS1-H8, E71T1-M21A2-CS1-H8 |
| ABS | ABS - Part 2 | 3YSA H10 |
| CWB | CSA W48 | E491T1-C1A3-CS1-H8 (E491T-9-H8), E491T1-GA3-CS1-H8 (E491T-9M-H8), E491T1-M20A3-CS1-H8 (E491T-9M-H8), E491T1-M21A3-CS1-H8 (E491T-9M-H8) |
| DNV-GL | DNV - 2.9 | III YMS H10 |
| LR | LR - Chapter 11 | 3YS H10 |
MECHANICAL PROPERTIES
| Classification | Shielding Gas | Polarity |
Yield Strength @ 0.2% Offset
MPa (ksi) |
Tensile Strength
MPa (ksi) |
Elongation
% |
Charpy V-Notch
J (ft-lbs) @ -30°C (-20°F) |
|---|---|---|---|---|---|---|
| E71T-9C-H8 Requirement | 100% CO2 | DC+ | 400 (58) min. | 480-660 (70-95) | 22 min. | 27 (20) min. |
| E71T-9M-H8 Requirement | 75-80% Ar, balance CO2 | DC+ | 400 (58) min. | 480-660 (70-95) | 22 min. | 27 (20) min. |
| E71T1-C1A2-CS1-H8 Requirement | 100% CO2 | DC+ | 400 (58) min. | 480-660 (70-95) | 22 min. | 27 (20) min. |
| E71T1-M21A2-CS1-H8 Requirement | M21-ArC | DC+ | 400 (58) min. | 480-660 (70-95) | 22 min. | 27 (20) min. |
| Typical Result, As-welded | 100% CO2 | DC+ | 560 (81) | 610 (89) | 30 | 38-46 (28-34) |
| Typical Result, As-welded | 75% Ar, 25% CO2 | DC+ | 590 (86) | 650 (95) | 25 | 89-95 (66-70) |
DEPOSIT COMPOSITION
| Classification | Shielding Gas | Polarity | %B | %C | %Mn | %P | %S | %Si |
Diffusible Hydrogen
mL/100g Weld Metal |
|---|---|---|---|---|---|---|---|---|---|
| E71T-9C-H8 Requirement | 100% CO2 | DC+ | 0.12 max. | 1.75 max. | 0.03 max. | 0.03 max. | 0.90 max. | 8.0 max. | |
| E71T-9M-H8 Requirement | 75-80% Ar, balance CO2 | DC+ | 0.12 max. | 1.75 max. | 0.03 max. | 0.03 max. | 0.90 max. | 8.0 max. | |
| E71T1-C1A2-CS1-H8 Requirement | 100% CO2 | DC+ | 0.12 max. | 1.75 max. | 0.030 max. | 0.030 max. | 0.90 max. | 8 max. | |
| E71T1-M21A2-CS1-H8 Requirement | M21-ArC | DC+ | 0.12 max. | 1.75 max. | 0.030 max. | 0.030 max. | 0.90 max. | 8 max. | |
| Typical Result | 100% CO2 | DC+ | 0.0050 | 0.06 | 1.21 | 0.01 | 0.011 | 0.41 | 4.2 |
| Typical Result | 75% Ar, 25% CO2 | DC+ | 0.0060 | 0.06 | 1.45 | 0.01 | 0.01 | 0.59 | 5.7 |
TYPICAL OPERATING PROCEDURES
| Diameter | Shielding Gas | Polarity |
CTWD
mm (in.) |
Wire Feed Speed
m/min (in/min) |
Voltage
volts |
Approx. Current
amps |
Melt-off Rate
kg/hr (lb/hr) |
Deposition Rate
kg/hr (lb/hr) |
Efficiency
% |
|---|---|---|---|---|---|---|---|---|---|
| 0.045 in (1.1 mm) | 75% Ar / 25% CO2 | DC+ | 19 (3/4) | 4.5 (175) | 21-24 | 130 | 1.7 (3.8) | 1.5 (3.3) | 87 |
| 0.045 in (1.1 mm) | 75% Ar / 25% CO2 | DC+ | 19 (3/4) | 6.4 (250) | 23-26 | 155 | 2.4 (5.4) | 2.1 (4.7) | 87 |
| 0.045 in (1.1 mm) | 75% Ar / 25% CO2 | DC+ | 19 (3/4) | 7.6 (300) | 24-27 | 180 | 2.9 (6.4) | 2.5 (5.6) | 87 |
| 0.045 in (1.1 mm) | 75% Ar / 25% CO2 | DC+ | 19 (3/4) | 8.9 (350) | 25-28 | 205 | 3.4 (7.6) | 3.0 (6.6) | 87 |
| 0.045 in (1.1 mm) | 75% Ar / 25% CO2 | DC+ | 19 (3/4) | 10.2 (400) | 26-29 | 230 | 4.0 (8.7) | 3.5 (7.6) | 87 |
| 0.045 in (1.1 mm) | 75% Ar / 25% CO2 | DC+ | 19 (3/4) | 12.8 (500) | 27-30 | 260 | 5.0 (10.9) | 4.3 (9.5) | 87 |
| 0.045 in (1.1 mm) | 75% Ar / 25% CO2 | DC+ | 19 (3/4) | 15.3 (600) | 28-31 | 290 | 6.0 (13.1) | 5.2 (11.4) | 87 |
| 0.052 in (1.3 mm) | 75% Ar / 25% CO2 | DC+ | 19 (3/4) | 3.8 (150) | 21-24 | 150 | 2.1 (4.6) | 1.8 (3.9) | 86 |
| 0.052 in (1.3 mm) | 75% Ar / 25% CO2 | DC+ | 19 (3/4) | 5.1 (200) | 22-25 | 180 | 2.8 (6.1) | 2.4 (5.2) | 86 |
| 0.052 in (1.3 mm) | 75% Ar / 25% CO2 | DC+ | 19 (3/4) | 6.4 (250) | 23-26 | 210 | 3.4 (7.6) | 3.0 (6.5) | 86 |
| 0.052 in (1.3 mm) | 75% Ar / 25% CO2 | DC+ | 19 (3/4) | 7.6 (300) | 24-27 | 240 | 4.8 (10.6) | 4.1 (7.8) | 86 |
| 0.052 in (1.3 mm) | 75% Ar / 25% CO2 | DC+ | 19 (3/4) | 10.2 (400) | 26-28 | 315 | 6.2 (13.7) | 5.4 (10.5) | 86 |
| 0.052 in (1.3 mm) | 75% Ar / 25% CO2 | DC+ | 19 (3/4) | 12.8 (500) | 28-31 | 335 | 6.9 (15.2) | 6.0 (13.1) | 86 |
| 1/16 in (1.6 mm) | 75% Ar / 25% CO2 | DC+ | 19 (3/4) | 3.2 (125) | 21-24 | 190 | 2.4 (5.2) | 2.0 (4.4) | 85 |
| 1/16 in (1.6 mm) | 75% Ar / 25% CO2 | DC+ | 19 (3/4) | 3.8 (150) | 22-25 | 205 | 2.8 (6.2) | 2.4 (5.3) | 85 |
| 1/16 in (1.6 mm) | 75% Ar / 25% CO2 | DC+ | 19 (3/4) | 5.1 (200) | 22-26 | 240 | 3.8 (8.3) | 3.2 (7.0) | 85 |
| 1/16 in (1.6 mm) | 75% Ar / 25% CO2 | DC+ | 19 (3/4) | 6.4 (250) | 23-27 | 290 | 4.7 (10.3) | 4.0 (8.8) | 85 |
| 1/16 in (1.6 mm) | 75% Ar / 25% CO2 | DC+ | 19 (3/4) | 7.6 (300) | 24-28 | 325 | 5.6 (12.4) | 4.8 (10.5) | 85 |
| 1/16 in (1.6 mm) | 75% Ar / 25% CO2 | DC+ | 19 (3/4) | 10.2 (400) | 27-31 | 400 | 7.5 (16.5) | 6.4 (14.0) | 85 |